Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Flashforge Creator 4 levi sklop ekstruderja HT 0,4 mm

Flashforge Creator 4 levi sklop ekstruderja HT 0,4 mm
Flashforge Creator 4 levi sklop ekstruderja HT 0,4 mm
628,04 €
PDF
PDF
Zaloga Ni na zalogiNi na zalogi Šifra izdelka 2185866 Model 20002961001 Garancija 2 leti

Dostava in vračila

Opis

The Flashforge Creator 4 Left Extruder Assembly-HT (0.4mm) is a replacement extruder module designed for use with the Flashforge Creator 4 3D printer. Manufactured for compatibility with Flashforge hardware, this left extruder features a 0.4 mm nozzle size intended to deliver detailed extrusion and consistent performance for modeling and prototyping tasks.

Advantages

This left extruder assembly provides a direct replacement that maintains correct fit and function with the Creator 4. The 0.4 mm nozzle supports fine-detail printing while the HT (high-temperature) designation indicates suitability for a range of common filaments used in professional and hobbyist applications. Being an OEM-compatible unit simplifies maintenance and reduces printer downtime.

Suitable for

  • Replacement of a damaged or worn left extruder on Flashforge Creator 4
  • Detailed 3D printing and prototyping with 0.4 mm nozzle resolution
  • Use with common filaments supported by Creator 4 when HT extruder is required

Key specifications

  • Brand compatibility: Flashforge
  • Model: Left Extruder Assembly - HT
  • Nozzle size: 0.4 mm
  • Manufacturer part number (MPN): 20002961001
  • EAN: 6971940407874

How to use

Power off the printer and follow the Creator 4 service manual or manufacturer instructions to remove the existing left extruder. Install the Left Extruder Assembly-HT in the designated mounting location, secure connectors and fasteners, then perform any required alignment and calibration steps through the printer's maintenance menu. After installation, run a test print and fine-tune extrusion and temperature settings as needed for the filament in use.

Recommendations

Use manufacturer-recommended temperatures and filament types for the Creator 4. Regularly inspect the nozzle and drive components for wear, and perform routine calibration after replacement to ensure print quality.

Ključne značilnosti
  • Replacement of a damaged or worn left extruder on Flashforge Creator 4
  • Detailed 3D printing and prototyping with 0.4 mm nozzle resolution
  • Use with common filaments supported by Creator 4 when HT extruder is required
  • Brand compatibility: Flashforge
  • Model: Left Extruder Assembly - HT
  • Nozzle size: 0.4 mm
  • Manufacturer part number (MPN): 20002961001
  • EAN: 6971940407874

Specifikacije

Specifikacije
Država porekla
Kitajska
Količina na paket
1 pc(s)
Vrsta izdelka
ekstruder
Združljivost
Creator 4
Združljivost z znamko
Flashforge
Zgodovina cen v zadnjih 6 mesecih
Flashforge Creator 4 levi sklop ekstruderja HT 0,4 mm
Trenutna
628,04 €
Najnižja 7 d.
622,33 €
Najvišja 7 d.
628,04 €
Sprememba 24 h
+5,71 €   +1%
Sprememba 7 d.
+8,56 €   +1%
Sprememba 30 d.
0,00 €   0%

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Več izdelkov FLASHFORGE v tej kategoriji

12

Priljubljeni izdelki v tej kategoriji

8
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije