Koaksialni kabel e+p HFA 10 10m

The e+p HFA 10 coaxial cable is a 10 m, 75 Ω digital-capable, double-shielded cable with coaxial connectors on both ends. It is intended for TV and radio use and for wide-band cable installations, offering high-frequency performance and low signal attenuation for audio and video transmission.

Advantages

Double shielding reduces electromagnetic interference and preserves signal integrity over longer runs. The 75 Ω impedance matches standard TV and radio equipment, and the cable construction is optimized for high-frequency applications to minimize loss. Connectors on both ends provide ready-to-use connectivity for quick installation.

Suitable for

• Connecting TV set-top boxes and televisions
• Radio receivers and antenna systems
• Wide-band cable distribution installations
• Home audio and video equipment connections

Key specifications

• Length: 10 m
• Impedance: 75 Ω
• Shielding: double shielded
• Compatibility: digital-capable, suitable for TV and radio
• Connectors: coaxial connectors on both ends
• Standard: DIN 45 325
• Brand / MPN / EAN: e p / HFA10 / 4005298001995

How to use

Connect one coaxial connector to the output of the source device (for example a set-top box, antenna amplifier or radio) and the other connector to the input of the receiving device (television, radio tuner or distribution amplifier). Ensure connectors are pushed on fully and, where applicable, tightened to avoid loose contact. Route the cable to avoid sharp bends and sources of strong electromagnetic interference.

Recommendations

For best results, use the cable in installations that require a 75 Ω impedance and double shielding, and avoid running the cable parallel to power lines to reduce potential interference. Inspect connectors periodically and replace the cable if the shielding or connectors show visible damage.