ACT 3 metre visokozmogljiv VGA in avdio kabel samec-samec

The ACT VGA Audio Connection Cable Male-Male 3m is a high-performance cable combining VGA (D-Sub) and 3.5 mm audio connectors on both ends for simultaneous video and audio transmission. The cable is shielded with an RF-Block hood so ferrite cores are not required, and all pins are connected to ensure full signal compatibility. A test report is included with delivery.

Advantages

The integrated RF-Block shielding reduces electromagnetic interference without additional ferrite cores. A full-pin wiring of the VGA connector preserves video signal integrity, while the combined VGA and 3.5 mm audio connectors provide a single-cable solution for many display and audio setups. The cable’s 3 metre length offers flexibility for desktop and presentation environments.

Suitable for

• Connecting desktop computers or laptops to monitors or projectors
• Presentation setups in meeting rooms and classrooms
• Extending existing VGA and analogue audio connections up to 3 metres

Key specifications

• Brand: ACT
• Model / MPN: AK4991
• EAN: 8716065256222
• Cable length: 3 m
• Connectors: VGA (D-Sub) + 3.5 mm (1/8") male on both ends
• Colour: Black
• Shielding: RF-Block hood (no ferrite cores needed)
• Wiring: All pins connected

How to use

Plug the VGA (D-Sub) connector into the VGA output of your computer and the corresponding VGA input on the monitor or projector. Connect the 3.5 mm audio jack to the audio output on the computer and the audio input on the display or external speakers. Secure any connector screws on the VGA plugs if present. Select the correct input source on the display device and configure audio output settings on your computer if necessary.

Recommendations

Avoid sharp bends and excessive tension on the cable. For best performance, keep the cable away from large sources of electromagnetic interference and ensure connectors are fully seated and tightened where applicable.