ACT RG-58 patch kabel črn 50 Ohm 3,00 m

The ACT RG-58 patch cable is a 3.00 m coaxial cable with BNC connectors on both ends and a characteristic impedance of 50 Ohm. It is intended for RF signal transmission and provides a durable connection with low signal loss for professional and home setups.

Advantages

The cable’s 50 Ohm impedance suits a wide range of RF applications. With BNC connectors on both ends and a 3.00 m length, it offers straightforward installation and compatibility with equipment using BNC interfaces. The construction reduces signal attenuation to maintain reliable performance.

Suitable for

• RF test equipment and measurement
• CCTV and video signal connections with BNC interfaces
• Amateur radio and antenna feedlines (short runs)
• Laboratory and educational setups requiring 50 Ohm cabling

Key specifications

• Brand: ACT
• Model / MPN: Q70300
• EAN: 8716065155044
• Cable type: RG-58 coaxial patch cable
• Connector type: BNC — both ends
• Impedance: 50 Ohm
• Length: 3.00 m

How to use

Connect the BNC connectors to the corresponding BNC sockets on your devices by aligning the connector and twisting until it locks. Ensure both ends are firmly seated to prevent intermittent contact. Use the cable for short runs between signal sources and receivers or test equipment, avoiding sharp bends or kinks that can damage the coaxial structure.

Recommendations

Avoid routing the cable near strong electrical noise sources or high-power transmission lines. For outdoor or extended installations, choose a cable and connectors rated for the specific environment. Inspect connectors periodically for corrosion or wear to maintain optimal signal quality.