Avdio kabel XLR Quad Kramer Electronics 10,7m

The Kramer Electronics XLR Quad Style audio cable is a 10.7 m professional-grade cable with a 3-pin male XLR connector on one end and a 3-pin female XLR connector on the other. Its quad-style, 4-core star construction is designed to reduce electromagnetic interference and maintain clear signal transmission for microphone and line-level audio applications. The cable is finished in black and is suitable for studio, stage, and live sound setups.

Advantages

The quad 4-conductor arrangement cancels electromagnetically induced noise from lighting ballasts and AC transformers, reducing induction noise to a fraction of that found in standard two-pair balanced mic cables. A large number of fine bare copper strands in conductors and shield provide high flexibility, while XLPE insulation offers stable electrical properties and resists shrink-back during soldering. The cable includes hand-soldered premium XLR connectors for reliable terminations.

Suitable for

• Connecting microphones to mixers, preamps, or audio interfaces
• Stage and live sound reinforcement
• Studio recording and broadcast setups
• Line-level interconnections where low interference is required

Key specifications

• Length: 10.7 m
• Connectors: 3-pin XLR male to 3-pin XLR female
• Construction: 4-core star quad cable
• Insulation: XLPE (cross-linked polyethylene)
• Color: Black
• Brand: Kramer Electronics
• MPN: 95-1211035
• EAN: 7291063042158

How to use

Connect the male XLR end to the microphone or source device and the female XLR end to the mixer, preamplifier, or audio interface input. Route the cable away from strong AC power sources where possible and avoid sharp bends or kinks to preserve shielding and conductor integrity. For permanent installations, secure the cable with appropriate clamps or ties without over-tightening.

Recommendations

For optimal noise rejection, keep the cable separate from power cables and avoid running alongside fluorescent ballast circuits. Inspect connectors periodically for secure solder joints and replace the cable if excessive wear or damage is observed.