Bosch 2 607 019 435 sveder

Drill Bit Bosch 2 607 019 435 — 19-piece set of HSS-R metal drill bits with diameters 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm. These high-speed steel (HSS‑R) bits are manufactured for precision drilling in metal and are also suitable for use in wood and plastic when metal-grade bits are required. The set covers a wide range of small to medium diameters, enabling accurate hole-making for professional and DIY tasks.

Advantages

The HSS‑R material provides good hardness and wear resistance for drilling into various metals. A sharp cutting edge ensures efficient chip removal and precise hole diameters. The comprehensive diameter range (1–10 mm) eliminates the need to buy individual bits for common small-diameter drilling tasks. Compatibility with standard drill chucks makes these bits convenient for use with Bosch and other handheld drills.

Suitable for

• Drilling holes in steel and other metals
• Metalworking repairs and maintenance
• Drilling in wood and plastic when metal bits are acceptable
• General workshop and DIY projects requiring small to medium holes

Key specifications

• Brand: Bosch
• Model / MPN: 2 607 019 435 (2607019435)
• EAN: 3165140415538
• Material: HSS‑R (high-speed steel, rolled)
• Set size: 19 pieces
• Diameters: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm

How to use

Choose the drill bit with the required diameter and secure it in the drill chuck according to the drill manufacturer's instructions. Use appropriate cutting speed and feed for HSS bits and the work material (lower speeds for harder metals). Apply light cutting oil when drilling steel to reduce heat and prolong bit life. Start with a center punch or pilot mark for precise positioning, then drill with steady pressure and clear chips regularly.

Recommendations

For best results when drilling metal, use coolant or cutting oil and moderate speed; tighten the drill chuck securely and avoid excessive lateral force. Replace worn bits to maintain hole accuracy and reduce risk of breakage. Store the set in a dry place to prevent corrosion.