Bosch 2 607 019 511 sveder

173-piece fixing set including masonry drill bits, screwdriver bits, screws, dowels and a magnetic universal holder. The set contains four masonry drill bits (5, 6, 7 and 8 mm), three Pozidriv screwdriver bits (25 mm length, PZ2) and a range of screws and wall plugs suitable for common anchoring tasks. The content is supplied as a compact assortment intended to support drilling and fixing jobs with compatible drill bits such as the Bosch 2607019511.

Advantages

The assortment provides a broad selection of commonly used diameters for masonry driling and anchoring, enabling immediate use without separate purchases. Included Pozidriv screwdriver bits and a magnetic universal holder improve handling and speed when fastening screws. The variety of screw lengths and dowel sizes covers multiple mounting requirements, reducing the need to mix components from different sets.

Suitable for

• Drilling into masonry, concrete and brick using 5–8 mm masonry bits
• Installing fixtures and fittings with matching screws and dowels
• General household repairs and DIY mounting tasks
• Use with standard drills and compatible bits such as Bosch 2607019511

Key specifications

• Kit size: 173 pieces
• Masonry drill bits: 4 pieces — Ø 5 mm, 6 mm, 7 mm, 8 mm
• Screwdriver bits: 3 pieces — PZ2, length 25 mm
• Screws: 75 pieces — 25 × 3.5×30 mm; 20 × 4.0×35 mm; 20 × 4.0×40 mm; 10 × 5.0×50 mm
• Dowels (wall plugs): 90 pieces — 30 × Ø5 mm; 25 × Ø6 mm; 20 × Ø7 mm; 15 × Ø8 mm
• Accessory: magnetic universal holder

How to use

Select a masonry drill bit of the appropriate diameter for the dowel and screw to be used, mount it in a standard drill chuck (compatible with bits such as Bosch 2607019511), drill the hole to the required depth, clean out dust, insert the matching dowel and fasten the screw using the supplied PZ2 screwdriver bit and magnetic holder. Follow usual drilling and fastening practices: steady pressure, correct drill speed for masonry and secure workpiece positioning.

Recommendations

Use appropriate personal protective equipment (safety glasses, gloves and a dust mask) when drilling in masonry. Ensure the substrate is suitable for the chosen dowel diameter and screw length. For heavy loads or structural fixings, consult relevant load tables or a professional to select the correct anchor type.