Bralnik kartic DeLOCK IDE 40-pinski na Compact Flash 91645

The Card Reader DeLOCK IDE 40pin to Compact Flash 91645 allows direct connection of a CompactFlash card to a 40‑pin IDE interface. The device is bootable and can be used as a hard drive substitute to install or run an operating system. It requires a 3.5" IDE connecting cable for installation and is compatible with a wide range of legacy and modern operating systems.

Advantages

This DeLOCK card reader provides a simple way to access CompactFlash media through an IDE connector. Being bootable, it can serve as a system disk for installation or recovery tasks. The product supports fast data transfer rates typical for IDE/CF setups and fits into standard 3.5" drive bays when connected with the appropriate cable.

Suitable for

Key specifications

How to use

Install the Card Reader into a 3.5" drive bay or mount it according to your system layout, then connect it to the motherboard using a 40‑pin IDE cable and to power via the system power connector. Insert a CompactFlash card into the reader. If you intend to boot from the card, configure the BIOS/UEFI boot order to prioritize the IDE device. No additional drivers are typically required for supported operating systems listed by the manufacturer.

Recommendations

Use a good‑quality 3.5" IDE cable and ensure proper power connection. For OS installation or system boot, check BIOS settings and confirm CompactFlash card compatibility with the target system. Keep firmware and backup copies of important data when performing recovery or update operations.