Črpalka za vodo Metabo P 2000 G

The Metabo P 2000 G is a garden water pump designed to deliver reliable irrigation and water transfer for domestic outdoor tasks. It provides a flow rate of up to 2000 l/h and a maximum pressure of 3 bar, driven by a 450 W motor. The compact construction and 7.6 kg lightweight body make placement and handling straightforward, while 1" suction and discharge ports allow connection to common garden hoses and fittings. The pump supports a maximum delivery head of 30 m and is offered in black, green and silver finishes to suit different installations.

Advantages

The pump combines a robust 450 W motor with a capacity to move 2000 l/h, offering steady flow for garden irrigation and water transfer. Its maximum pressure of 3 bar and 30 m delivery height enable operation in multi-zone garden layouts or to supply water to elevated storage. The compact, lightweight design reduces effort during installation and relocation. Standard 1" inlet and outlet ports simplify hose and fitting compatibility, and the range of available colours helps integrate the unit visually into various outdoor settings.

Suitable for

• Garden irrigation for lawns, flowerbeds and vegetable patches
• Filling and emptying water tanks or barrels
• Transferring water from wells or ponds for outdoor use
• Boosting water supply to taps or sprinkler systems in small properties

Key specifications

• Flow rate: up to 2000 l/h
• Motor power: 450 W
• Maximum pressure: 3 bar
• Maximum delivery height (head): 30 m
• Suction port diameter: 1"
• Discharge port diameter: 1"
• Weight: 7.6 kg
• Available colours: black, green, silver

How to use

Place the pump on a stable, level surface near the water source and ensure both suction and discharge ports are free of debris. Connect a suitable 1" hose or pipe to the suction port and prime the pump according to the manufacturer’s instructions if required by the installation. Attach the discharge hose to the outlet and secure all connections to prevent air ingress. Connect the pump to a properly rated electrical supply and switch it on; monitor for steady flow and check for leaks. After use, switch off the pump, disconnect power, and drain hoses to prevent frost damage or stagnation.

Recommendations

Use hoses and fittings that match the 1" ports to maintain flow performance and avoid leaks. For prolonged life, avoid running the pump dry and protect it from freezing temperatures. Regularly inspect and clean filters or strainers to prevent blockage and reduce wear on the impeller and motor.