Kabel DeLOCK 0,3m Floppy 4-pin / 2x SATA 15-pin

This Delock power cable converts a motherboard floppy 4-pin power connector into two SATA 15-pin power connectors. With a 0.3 m length and a single male floppy plug on one end, the cable supplies power to two SATA devices from a single floppy power header, allowing integration of SATA drives in systems that provide only a floppy-style power output.

Advantages

The cable is compact (0.3 m) and simple to install, enabling power distribution from a single floppy 4-pin connector to two SATA 15-pin plugs. Its design supports common PC internals and helps connect modern SATA drives where an additional dedicated power connector is not available. The product is supplied in a polybag and is compatible with standard SATA power requirements.

Suitable for

• Powering one or two SATA hard drives or SSDs from a floppy 4-pin power header
• Retrofit or upgrade of older systems with limited power connectors
• Internal PC builds and repairs where an extra SATA power lead is required

Key specifications

• Cable length: 0.3 m
• Connector (input): Floppy 4-pin (male)
• Connector (output): 2 × SATA 15-pin
• Brand: DELOCK
• MPN: 84859
• EAN: 4043619848591
• Product colour: Multicolour

How to use

Power off the PC and disconnect it from mains. Locate the motherboard floppy 4-pin power header and firmly plug the male floppy connector into that header. Route the cable to the drive bay and attach the two SATA 15-pin connectors to the power sockets of the SATA drives. Ensure connectors are fully seated before restoring power to the system.

Recommendations

Use this cable only for powering SATA drives; avoid connecting it to non-compatible devices. Confirm that the motherboard floppy power header can supply sufficient current for the connected drives and do not overload the circuit. Handle connectors gently to prevent bent pins or loose contacts.