Digitalni manometer KS Tools 100.4060

The KS Tools Digital pressure gauge 100.4060 is a compact instrument for measuring gas pressure in a range suitable for tyres, compressors and other pneumatic applications. The device covers pressures from 0.35 to 6.8 bar and displays readings on a clear LCD screen. Multiple units are available for reading results, including bar, kPa and psi. Powered by a CR2032 lithium battery, the gauge is lightweight and portable, designed for easy handling in workshop or roadside situations.

Advantages

The digital pressure gauge provides quick, direct readings on an LCD display and supports unit conversion between bar, kPa and psi for international compatibility. Its measurement range of 0.35–6.8 bar fits common tyre and low-pressure pneumatic needs. The compact, lightweight design and battery power make the instrument easy to carry and use without external power sources. The straightforward interface reduces reading errors and speeds up routine checks.

Suitable for

• Checking and adjusting vehicle tyre pressure (cars, vans, motorcycles) within the specified range
• Measuring pressure in small compressors and pneumatic tools
• Workshop inspections and on-site maintenance tasks requiring portable pressure readings

Key specifications

• Measurement range: 0.35–6.8 bar
• Display: LCD for numeric readout
• Units: bar, kPa, psi
• Power source: CR2032 lithium battery
• Weight: approximately 90 g
• Packaging/size reference: 106 mm × 200 mm

How to use

Switch on the gauge and select the desired unit of measurement. Attach the gauge securely to the tyre valve or pressure port, ensuring a tight seal to avoid leaks. Read the pressure value on the LCD once the reading stabilises. If necessary, adjust air pressure and re-measure until the target pressure is reached. After use, remove the gauge, switch it off to conserve battery, and store it in a dry place.

Recommendations

Always verify the recommended pressure values from the vehicle manufacturer or equipment manual before adjusting pressure. Use the gauge within the specified range and replace the CR2032 battery when display dimming or inconsistent readings occur. Keep the valve connection clean and free of debris to maintain accuracy.