Ekscentrični brusilnik Metabo DSE 280 Intec

The Metabo DSE 280 Intec orbital sander is a compact, high-speed sanding tool designed for efficient surface preparation. With a 280 W motor and an idle speed up to 22,000 RPM, this sander delivers rapid material removal and a fine finish on wood, paint, and composite surfaces. Its lightweight construction of 1.3 kg helps reduce user fatigue during extended tasks, while Velcro sanding media fixing enables quick abrasive changes. The tool is powered from AC mains and offers an oscillation rate between 14,000 and 22,000 OPM to balance aggressiveness and finish quality.

Advantages

The DSE 280 Intec combines a high rotational speed with a compact 280 W drive, providing consistent sanding performance for both coarse and fine operations. The low weight improves handling and control, particularly on vertical and overhead surfaces. Velcro sanding attachment simplifies abrasive replacement and saves time on the job. The adjustable oscillation rate allows matching the sanding action to the material and desired surface quality.

Suitable for

• Removing old finishes and paint from wooden panels and furniture
• Preparing surfaces for repainting or varnishing
• Sanding small to medium-sized wooden components and edges
• Refining composite and filler materials before finishing

Key specifications

• Power: 280 W
• Idle speed (max): 22,000 RPM
• Oscillation rate: 14,000–22,000 OPM
• Drive type: AC mains
• Weight: 1.3 kg
• Sanding media fixing: Velcro (hook-and-loop)

How to use

Select an appropriate abrasive grade and attach it to the sanding pad using the Velcro fixing. Connect the sander to a suitable AC outlet and set the oscillation rate according to the material and desired finish; start with a lower rate for fine finishing and increase for more aggressive material removal. Hold the tool with even pressure and move it steadily across the workpiece to avoid creating depressions. Periodically check the abrasive for wear and replace as needed. Follow standard safety practices including eye and hearing protection.

Recommendations

For optimal results, begin sanding with a medium-grit abrasive to remove coatings and shape the surface, then progressively move to finer grits for smoothing. Use a dust extraction system or work in a well-ventilated area to minimize airborne dust. Maintain even, light pressure and keep the sander moving to prevent swirl marks and uneven surfaces.