Equip Cat.6 U/UTP RJ-45 patch kabel 0,25 m moder

The equip® Cat.6 U/UTP Patch Cable is a short, high-performance network cable designed for reliable Ethernet connections. With a 0.25 m length and RJ-45 connectors with gold plating, this blue cable supports 10GBase-T data transmission up to 10000 Mbit/s while maintaining signal integrity through U/UTP construction.

Advantages

The Cat.6 construction provides increased bandwidth and an improved signal-to-noise ratio compared with lower category cables. Gold-plated RJ-45 connectors ensure stable contact and corrosion resistance. The U/UTP design reduces electromagnetic interference for cleaner data transmission in crowded network environments.

Suitable for

• Short patch connections between network devices (switch to patch panel, switch to wall outlet)
• High-speed Ethernet links requiring 10GBase-T performance
• Rack or desk installations where a compact, 0.25 m cable is needed

Key specifications

• Cable length: 0.25 m
• Connectors: RJ-45 to RJ-45, gold-plated
• Cabling technology: 10GBase-T (Cat.6)
• Maximum data rate: 10000 Mbit/s
• Shielding: U/UTP (unshielded twisted pairs with overall braid not present)
• Colour: Blue
• Weight: 0.018 kg
• Brand / MPN / EAN: EQUIP / 625433 / 4015867172193

How to use

Connect one RJ-45 connector to your network device (for example a switch or router) and the other RJ-45 connector to the target device or patch panel. Ensure connectors are fully seated until the latch clicks. Route the 0.25 m cable to avoid sharp bends and excessive tension to maintain signal quality.

Recommendations

Use this 0.25 m Cat.6 U/UTP cable for short, high-speed connections within racks or between adjacent devices. For longer distances or environments with strong electromagnetic interference, consider a shielded cable or higher-category cabling as appropriate for your network design.