Equip Cat.6 U/UTP RJ-45 patch kabel 0,5 m moder

The Equip Cat.6 U/UTP Patch Cable (0.5 m) is a high-performance network patch lead designed for reliable data transmission in structured cabling and local area networks. It features RJ-45 connectors with gold plating for improved conductivity and is manufactured to meet industry standards for Cat.6 performance, supporting data rates up to 10000 Mbit/s. The U/UTP construction minimises interference while the blue jacket provides clear visual identification in cable runs.

Advantages

The cable delivers higher bandwidth and an improved signal-to-noise margin compared with lower-category patch cords, enabling stable high-speed connections. Gold-plated RJ-45 connectors ensure consistent contact quality and reduced corrosion. Its 0.5 m length is suitable for short patching between equipment in racks or on workstations, and the U/UTP design helps reduce near-end crosstalk and external electromagnetic interference.

Suitable for

• Short connections between switches, patch panels and servers
• Workstation and desktop patching
• 10GBase-T network segments in small or medium installations
• Environments requiring clear cable identification (blue)

Key specifications

• Length: 0.5 m
• Connectors: RJ-45 to RJ-45, gold-plated contacts
• Category: Cat.6 U/UTP
• Data rate: up to 10000 Mbit/s (10GBase-T)
• Colour: Blue
• Weight: 0.025 kg

How to use

Connect one RJ-45 plug to the desired network port on a switch, patch panel or device and the other end to the corresponding port. Ensure connectors are fully inserted until the latch engages. Use the 0.5 m length for short patching runs to avoid excess cable buildup in racks or on desks. Verify link status on connected devices to confirm proper connection and negotiated speed.

Recommendations

For optimal performance, avoid running the cable parallel to high-power electrical lines and keep bend radii gentle. Use the cable for short interconnections within racks, between patch panels and switches, or between a switch and a server or workstation. Inspect connectors for damage before installation and replace if contacts are bent or housings cracked.