Equip Cat.6A U/UTP tanek patch kabel, 1,0 m, bel

The Equip Cat.6A U/UTP Slim Patch Cable 1.0m White is a 1 meter network patch cable engineered for 10 Gigabit Ethernet and frequencies up to 500 MHz. Its slim 32 AWG unshielded twisted pair construction reduces diameter to improve airflow and cable management in dense racks and patch panels while maintaining reliable data transmission and flexibility for frequent reconfiguration.

Advantages

The slim U/UTP design saves space and eases routing in tight installations without adding shielding, making the cable suitable for environments with low to moderate electromagnetic interference. Stranded bare copper conductors and a molded boot with strain relief provide flexibility and durability for repeated plugging and movement. The cable meets ISO/IEC 11801 and EN 50173 standards, is RoHS compliant and available in LSZH/LSOH jacket material.

Suitable for

• Patching in data centers and server rooms
• Connections between switches, patch panels and end devices
• High-density network racks and cable management channels
• PoE and PoE+ powered equipment
• Workplaces and office network installations

Key specifications

• Length: 1 m
• Category: Cat6a U/UTP (unshielded)
• Conductor: stranded bare copper, 32 AWG
• Connectors: RJ-45 straight male — both ends
• Bandwidth/frequency: up to 500 MHz
• Transmission: up to 10 Gbit/s (10GBase-T)
• PoE: suitable for PoE and PoE+
• Jacket: Low Smoke Zero Halogen (LSZH/LSOH)
• Standards: ISO/IEC 11801, EN 50173
• Colour: White

How to use

Connect one RJ-45 end to a network switch or patch panel and the other end to the target device or patch panel port. Ensure connectors are fully inserted until the latch clicks and avoid sharp bends near the connector and strain relief. Route the slim cable through cable trays or management channels to preserve airflow and minimize mechanical stress.

Recommendations

The cable is intended for use in low to moderate EMI environments; avoid runs parallel to high-voltage power cables and maintain bend radius recommended by the manufacturer. For permanent horizontal wiring in environments with strong electromagnetic interference or where extra protection is required, consider shielded alternatives.