F/UTP CAT5E patch kabel ACT IB7815 15 m vtiči RJ45 rumen

The ACT IB7815 F/UTP CAT5E patch cable in yellow is a 15 meter network cable with RJ-45 connectors on both ends. It uses FTP shielding around each pair (F/UTP) and AWG#26 conductors, with 50 µ gold-plated contacts and an LSZH sheath for reduced smoke and halogen emissions. The bright yellow Pantone 110C colour makes the cable easy to identify in installations.

Advantages

The cable provides stable data transmission consistent with CAT5E specifications and features sturdy RJ-45 connectors with 50 µ gold contacts for improved signal contact and corrosion resistance. AWG#26 conductors deliver adequate performance for typical fast Ethernet applications, while the LSZH sheath reduces toxic fumes in confined spaces. FTP shielding helps limit electromagnetic interference.

Suitable for

• Wired local area networks (Ethernet) up to CAT5E performance
• Office and home network patching and connections
• Cable identification and colour-coded installations
• Environments where low-smoke, halogen-free cabling is required

Key specifications

• Cable type: F/UTP CAT5E
• Length: 15 m
• Conductors: AWG#26
• Connectors: RJ-45 — both ends
• Contacts: 50 µ gold-plated
• Sheath: LSZH (low smoke, zero halogen)
• Colour: Yellow (Pantone 110C)

How to use

Connect each RJ-45 connector to the Ethernet ports of your devices (switch, router, computer, patch panel). Ensure connectors are fully inserted until they click. Route the cable without sharp bends and avoid placing it parallel and close to strong electrical sources to minimise interference. For neat installations, secure the cable with appropriate clips or ties, taking care not to crush or overbend the cable.

Recommendations

For reliable performance, use this F/UTP CAT5E cable for typical Ethernet links within the specified length of 15 m; if runs require higher bandwidth or longer distances, consider CAT6/CAT6A alternatives or structured cabling standards.