Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s

Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
3.022,99 €
PDF
PDF
Zaloga 10 Šifra izdelka 877833 Model PY-SR4C6 Garancija 2 leti

Dostava in vračila

Predvidena dostava ponedeljek, 7. december
O stanju vas bomo sproti obveščali prek našega podrobnega sistema za sledenje
Možnosti plačila
Bančna karticaVisaMastercardApple PayGoogle PayBančno nakazilo

Postavite vprašanje – AI-pomočnik odgovori takoj.

Opis

The Fujitsu PRAID EP680i RAID controller is a server-class I/O adapter designed for enterprise storage environments. It provides a PCI Express x8 host interface and supports SAS storage drives with a sustained data transfer capability of 16 Gbit/s. The controller implements hardware RAID with support for RAID levels 0, 1, 5, 6, 10, 50 and 60 to balance performance, capacity and data protection according to deployment requirements.

Advantages

This RAID controller delivers high throughput and low latency via the PCI Express x8 connection and a 16 Gbit/s transfer capability, making it suitable for demanding transactional and data-intensive workloads. Hardware-level RAID offload improves CPU efficiency and provides consistent performance for mixed I/O patterns. Broad RAID level support enables flexible configurations for redundancy and capacity optimization while SAS drive compatibility ensures use with enterprise-grade storage media.

Suitable for

  • Server storage arrays requiring hardware RAID acceleration
  • Database servers and virtualised environments with mixed read/write loads
  • Backup and archiving systems where redundancy and capacity scaling are needed
  • High-availability configurations using RAID 1, 6, 10, 50 or 60

Key specifications

  • Host interface: PCI Express x8
  • Maximum transfer rate: 16 Gbit/s
  • Supported drive interface: SAS
  • Supported RAID levels: 0, 1, 5, 6, 10, 50, 60
  • Form factor: low-profile expansion card (fits standard server PCIe slots)

How to use

Install the controller into an available PCI Express x8 slot in a compatible server following the server manufacturer’s hardware installation procedures. Connect SAS drive backplanes or direct-attach SAS drives to the controller ports. Configure RAID arrays using the controller’s management utility during system boot or via vendor-supplied software in the operating system. Perform an initial consistency check or rebuild after creating arrays and monitor array health through the management interface.

Recommendations

For reliable operation, pair the controller with enterprise-grade SAS drives and ensure firmware and management utilities are kept up to date. Choose RAID levels according to the trade-off between performance and redundancy: use RAID 10 for write-intensive workloads requiring low latency, RAID 6 for large-capacity arrays with higher fault tolerance, and RAID 5/50 for mixed workloads where capacity efficiency is important. Regularly monitor drive health and plan replacement procedures to minimise rebuild impact on performance.

Ključne značilnosti
  • Server storage arrays requiring hardware RAID acceleration
  • Database servers and virtualised environments with mixed read/write loads
  • Backup and archiving systems where redundancy and capacity scaling are needed
  • High-availability configurations using RAID 1, 6, 10, 50 or 60
  • Host interface: PCI Express x8
  • Maximum transfer rate: 16 Gbit/s
  • Supported drive interface: SAS
  • Supported RAID levels: 0, 1, 5, 6, 10, 50, 60
  • Form factor: low-profile expansion card (fits standard server PCIe slots)

Specifikacije

Specifikacije
Gostiteljski vmesnik
PCI Express x8
Hitrost prenosa podatkov
16 Gbit/s
Migracija ravni RAID
Da
Notranji priključki SAS
16
Podpora za S.M.A.R.T.
Da
Podprti vmesniki pogonov za shranjevanje
SAS
Ravni RAID
0, 1, 5, 6, 10, 50, 60
Različica rež PCI Express
4.0

Letak

Odpri Letak
Zgodovina cen v zadnjih 6 mesecih
Fujitsu PRAID EP680i krmilnik RAID PCI Express x8 4.0 16 Gbit/s
Trenutna
3.022,99 €
Najnižja 7 d.
3.001,99 €
Najvišja 7 d.
3.022,99 €
Sprememba 24 h
0,00 €   0%
Sprememba 7 d.
+21,00 €   +1%
Sprememba 30 d.
+1.254,60 €   +71%

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Več izdelkov Fujitsu v tej kategoriji

12

Priljubljeni izdelki v tej kategoriji

1
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije