HDMI kabel LogiLink CHA0105 2 m

The LogiLink HDMI Cable CHA0105 is a 2 m HDMI Type A to Type A cable designed for high-bandwidth audio, video and data transmission. Compliant with HDMI 2.1 specifications and a 48 Gbit/s bandwidth, it supports resolutions up to 8K at 60 Hz and 4K at 120 Hz. The cable has gold-plated contacts and a black/grey finish suitable for home entertainment and professional display connections.

Advantages

This HDMI cable provides a high data transfer rate (48 Gbit/s) for loss-minimized video and audio transmission, supports high resolutions and refresh rates including 8K/60 Hz and 4K/120 Hz, and uses gold-plated connectors to ensure reliable contact. Its 2 m length gives flexibility for typical AV setups and the standard HDMI Type A connectors make it compatible with a wide range of TVs, monitors, game consoles and media players.

Suitable for (tasks / use cases)

• Connecting 4K or 8K TVs and monitors to PCs, players or receivers
• High-frame-rate gaming consoles and PC graphics cards supporting 4K/120 Hz
• Home theatre systems with ARC support
• Professional AV setups requiring HDMI 2.1 bandwidth

Key specifications

• Model: LogiLink CHA0105
• Length: 2 m
• Connectors: HDMI Type A to HDMI Type A
• HDMI version: 2.1
• Bandwidth: 48 Gbit/s
• Supported resolutions: up to 8K@60 Hz, 4K@120 Hz
• Contact plating: gold-plated
• Color: black, grey

How to use

Connect one HDMI Type A end of the cable to the HDMI output on your source device (PC, console, Blu-ray player, AV receiver) and the other end to the HDMI input of your display or TV. Ensure both devices support the desired resolution and refresh rate, and select the correct HDMI input on the display. For optimal performance, use device settings to enable HDMI 2.1 features such as higher refresh rates or enhanced color formats if available.

Recommendations

For best results, verify that connected devices and cables are set to HDMI 2.1 modes in their settings and use high-quality HDMI ports on both source and display. Avoid sharp bends and excessive tension on the cable to maintain signal integrity. If you experience signal issues at maximum resolutions, try reducing resolution or refresh rate, check connections, or replace with a shorter cable if necessary.