HDMI kabel VALUE 14.99.3482 50 m

The VALUE 14.99.3482 HDMI cable is a 50 m active optical HDMI (AOC) cable with HDMI Type A connectors on both ends. It supports UHD resolution up to 3840 x 2160 at 60 Hz and a data transfer rate up to 10.2 Gbit/s, allowing a single-cable connection between devices over long distances without an external power supply. The black cable is designed for reliable video transmission and is suitable for routing in cable ducts.

Advantages

This active HDMI fiber cable enables stable UHD (3840x2160 @60Hz) signals over distances up to 50 m while requiring no external power source. The optical construction reduces signal loss and electromagnetic interference compared with long copper runs, and the standard HDMI Type A connectors ensure compatibility with TVs, projectors and computers.

Suitable for

• Connecting TVs to AV receivers or media players over long distances
• Linking projectors to source devices in conference rooms or lecture halls
• Connecting desktop computers or workstations to distant monitors

Key specifications

• Length: 50 m
• Connectors: HDMI Type A — both ends
• Maximum resolution: 3840 x 2160 @ 60 Hz (UHD)
• Data rate: up to 10.2 Gbit/s
• Cable type: Active Optical Cable (AOC)
• Colour: Black
• Brand / MPN / EAN: VALUE / 14.99.3482 / 7611990151486

How to use

Connect one HDMI Type A connector to the source device (for example a Blu‑ray player, computer or media player) and the other connector to the display device (TV, monitor or projector). Ensure both devices are powered on and set to the correct HDMI input. The active cable requires no separate power supply; it will draw the necessary power through the HDMI connection. Route the cable through cable ducts as needed, avoiding sharp bends or crushing.

Recommendations

For reliable UHD performance maintain gentle cable bends (minimum bend radius as recommended by installer practices), avoid tight loops and keep the cable away from strong electrical noise sources. Test the connection at the desired resolution and refresh rate after installation to confirm compatibility with your devices.