InLine patch kabel, Cat.6A, S/FTP, PUR industrijski, črn, 1,5 m

The InLine Patch cable Cat.6A S/FTP with PUR industrial jacket is a 1.5 m network cable designed for high-speed data transmission up to 10000 Mbit/s. It has RJ-45 connectors on both ends and S/FTP shielding to reduce electromagnetic interference, and the robust PUR outer sheath is intended for use in industrial environments.

Advantages

The S/FTP shielding structure offers strong protection against crosstalk and external interference. The Cat.6A specification and 10GBase-T cabling technology support 10 Gbit/s networks. The PUR industrial jacket provides increased mechanical resistance and better durability in harsh or moving installations. Standard RJ-45 connectors ensure compatibility with common network equipment.

Suitable for

• Industrial Ethernet connections
• Server room patching and rack cabling
• High-speed data transmission and 10GBase-T networks
• Environments requiring durable, abrasion-resistant cables

Key specifications

• Length: 1.5 m
• Cable category: Cat.6A
• Shielding: S/FTP
• Cabling technology: 10GBase-T
• Connectors: RJ-45 — both ends
• Data rate: up to 10000 Mbit/s
• Colour: Black

How to use

Plug the RJ-45 connector into the corresponding network port on your device and the other end into a switch, patch panel or router. Ensure connectors are fully inserted and locks engage. Route the cable so it is not subjected to sharp bends or crushing forces; avoid running it near strong sources of electromagnetic interference when possible. For industrial installations use appropriate strain relief and fastening to prevent mechanical stress.

Recommendations

Use this Cat.6A S/FTP patch cable for short runs up to 1.5 m where a durable PUR jacket and high shielding are required. Inspect connectors for damage before use and replace if shielding integrity is compromised. For permanent outdoor exposure or direct burial choose cables specifically rated for those conditions.