InLine patch kabel S/FTP PiMF Cat.6A brez halogenov 500MHz moder 5m

The InLine Patch Cable S/FTP PiMF Cat.6A halogen free 500MHz blue 5m is a high-performance patch cable designed for professional cabling in Gigabit and 10 Gigabit networks. With S/FTP (shielded foil around each pair plus overall braid) and Pair-in-Metal-Foil construction it provides increased protection against electromagnetic interference and crosstalk. The cable is halogen-free and rated for operation up to 500 MHz, making it suitable for use in data centers, server racks and other installations requiring reliable, high-speed connections.

Advantages

The S/FTP PiMF design ensures strong shielding for each twisted pair and an overall braid, which improves signal integrity in dense cabling environments. Halogen-free materials reduce toxic smoke and corrosive gases in case of fire. The cable supports Cat.6A performance up to 500 MHz and is fitted with RJ-45 connectors on both ends for wide compatibility with network equipment. The 5 m length and blue jacket make routing and identification simple in structured cabling setups.

Suitable for

• Data centers and server racks
• High-speed Ethernet connections up to 10 Gigabit
• Structured cabling in office and telecom rooms
• Environments where low smoke and halogen-free materials are required

Key specifications

• Category: Cat.6A
• Shielding: S/FTP (Pair in Metal Foil + overall braid)
• Frequency rating: up to 500 MHz
• Length: 5 m
• Connectors: RJ-45 to RJ-45
• Colour: Blue
• Halogen-free: Yes
• Brand: InLine, MPN: 76805B, EAN: 4043718088744

How to use

Connect one RJ-45 end to your network device (switch, router, server) and the other end to the corresponding port on the destination device or patch panel. Avoid sharp bends and excessive pulling; adhere to standard cable management practices in racks and enclosures. For best performance, keep cable runs within recommended maximum lengths for structured cabling and separate from large power sources to minimise interference.

Recommendations

Install the cable in structured cabling channels or patch panels to maintain shielding effectiveness. For critical links, test the installed connection with appropriate Cat.6A certification or verification tools to confirm performance up to 500 MHz and 10 Gbps operation.