InLine patch kabel S/FTP PiMF Kat.6 250MHz PVC baker moder 5m

InLine Patch Cable S/FTP PiMF Cat.6 250MHz PVC copper blue 5m is a Cat.6 twisted-pair patch cable for connecting network components with RJ45 connectors. The 5 m cable supports Gigabit Ethernet (1 Gbps) and is specified for operation up to 250 MHz. Its copper conductors and PVC outer jacket provide standard electrical performance and mechanical protection for typical home and office network installations.

Advantages

The cable uses S/FTP PiMF (shielded foil around each pair plus an overall braided shield) to reduce electromagnetic interference and crosstalk, improving signal integrity in environments with multiple cables and electronic equipment. A 5 m length offers flexibility for patching between switches, routers, sockets and patch panels, while the blue PVC jacket helps with visual identification in structured cabling systems.

Suitable for

• Connecting switches, routers and network sockets
• Patch panels and network interface cards (NICs)
• Gigabit Ethernet (1 Gbps) cabling runs up to 250 MHz
• Home and office network patching

Key specifications

• Category: Cat.6
• Shielding: S/FTP PiMF (individual pair foil + overall braid)
• Bandwidth: up to 250 MHz
• Maximum data rate: 1 Gbps (Gigabit Ethernet)
• Length: 5 m
• Conductor material: copper
• Jacket material: PVC
• Connector: RJ45
• Colour: Blue

How to use

Connect one RJ45 connector to a network device (for example a switch, router or NIC) and the other RJ45 connector to the corresponding port on the second device or wall socket. Ensure connectors are fully inserted and latched to maintain a reliable electrical connection. Route the cable to avoid sharp bends and sources of strong electromagnetic interference; secure the cable with cable ties or clips where necessary.

Recommendations

Use this S/FTP Cat.6 patch cable for horizontal patching within racks and between nearby network devices. For permanent in-wall installations or runs longer than recommended channel lengths, choose cabling rated for permanent link installation and verify local installation standards.