INTENSO 2,5 inch SATA 3.0 SSD 240 GB

The INTENSO 240GB 2.5" SATA 3.0 SSD delivers a compact storage upgrade designed to accelerate system responsiveness. With sequential read speeds up to 520 MB/s and write speeds up to 480 MB/s, this 2.5-inch solid-state drive uses the SATA 3.0 interface to replace mechanical drives or older SSDs, reducing boot times and improving application launch and file transfer performance. The drive is suitable for laptops, desktops, and small form-factor systems that accept a 2.5" SATA drive.

Advantages

The INTENSO 240GB SSD provides faster sequential and random access compared with typical hard disk drives, lowering latency for everyday tasks. Its 2.5" form factor and SATA 3.0 connectivity make it broadly compatible with many consumer and business systems. The drive offers a reliable option for increasing storage performance without changing system hardware architecture.

Suitable for

• Upgrading laptops and desktops to improve boot and application load times
• Replacing failing or slow mechanical hard drives
• Adding a fast secondary drive for media storage and file transfer
• Use in home office and general productivity systems

Key specifications

• Form factor: 2.5-inch
• Interface: SATA 3.0 (6 Gbps)
• Storage capacity: 240 GB
• Sequential read speed: up to 520 MB/s
• Sequential write speed: up to 480 MB/s
• Typical operating voltage and power optimized for standard SATA drive bays

How to use

Install the INTENSO 240GB SSD into a 2.5" drive bay or use a compatible adapter or caddy for installations in systems with different drive form factors. Connect the SSD to the motherboard using a SATA data cable and to the power supply with a SATA power connector. If replacing an existing drive, clone the operating system and data using imaging software or perform a clean OS installation. After physical installation, verify BIOS/UEFI recognition and set the drive as the boot device if required.

Recommendations

For optimal results, enable AHCI mode in BIOS/UEFI before installing the operating system, ensure the latest SATA controller drivers are installed, and periodically update system firmware. Maintain regular backups of important data and avoid filling the drive to full capacity to preserve sustained performance.