Ixxat CANopen Master/Slave modul za SIMATIC S7-1200 PLC 21620

Integrating CANopen networks into Siemens SIMATIC S7-1200 PLC systems often requires additional hardware and complex configuration. The Ixxat CANopen module (21620) solves this by providing a direct, backplane-mounted solution that enables the S7-1200 to act as a CANopen master or slave. It handles the CANopen protocol stack internally, allowing the PLC to exchange process data with CANopen devices through simple I/O mapping in the TIA Portal.

Who is it for

Automation engineers and system integrators who need to connect CANopen devices—such as drives, encoders, or I/O blocks—to a Siemens S7-1200 PLC. It is suitable for both new installations and retrofits where CANopen fieldbus connectivity is required.

Main features

• CANopen master and slave functionality in one module
• Supports up to 127 CANopen slave devices in master mode
• Compliant with CiA 301 V4.2 and CiA 302 V4.1 (Manager)
• CAN 2.0A/B interface with galvanic isolation
• Configurable bit rates from 10 kbit/s to 1 Mbit/s
• Integrated 9-pin D-Sub male CAN connector
• Powered directly from the S7-1200 backplane (24V DC)
• Configuration via Siemens TIA Portal V13 SP1 or higher

Specifications

• Product Type: CANopen Communication Module
• Compatibility: Siemens SIMATIC S7-1200 PLC
• CANopen Role: Master and/or Slave
• CANopen Standard: CiA 301 V4.2, CiA 302 V4.1 (Manager)
• Max. CANopen Slaves (Master Mode): 127
• CAN Standard: CAN 2.0A/B (ISO 11898-2)
• CAN Bit Rates: 10 kbit/s to 1 Mbit/s
• CAN Interface Isolation: Galvanic Isolation
• PLC Integration: Siemens TIA Portal (V13 SP1 or higher)
• Data Exchange: I/O Area
• Power Supply: 24V DC via S7-1200 backplane
• CAN Connector: D-Sub 9-pin male
• Operating Temperature: -25 to +70 °C
• Storage Temperature: -40 to +85 °C
• Relative Humidity: 10 - 90 % (non-condensing)
• Certifications: CE, UL

Tips

Ensure your TIA Portal version is V13 SP1 or later to use the configuration tools. When designing a CANopen network, plan the bus length and termination according to the selected bit rate. The module's galvanic isolation helps protect the PLC from ground loops and voltage differences on the CAN bus.