Kabel HDMI DeLOCK 85141, 0,5 m, HDMI tip A tip C, bel

The DeLOCK 85141 is a 0.5 m HDMI cable with a standard HDMI Type A (male) connector on one end and a Mini HDMI Type C (male) connector on the other. The cable supports up to 18 Gbit/s bandwidth and resolutions up to 3840 x 2160 pixels (4K at 60 Hz). It features gold-plated contacts and a slim, triple-shielded design that supports audio, video and Ethernet transmission while keeping connector size compact.

Advantages

The slim-diameter cable with short connectors reduces strain and fits in tight spaces. Triple shielding improves signal integrity and reduces interference, while gold-plated contacts provide reliable conductivity and corrosion resistance. With support for 18 Gbit/s, the cable transmits 4K video at 60 Hz, 4K 3D at 24 Hz and 21:9 cinema aspect ratio, and it can carry Ethernet and multi-channel audio with sampling rates up to 1536 kHz.

Suitable for

• Connecting cameras or tablets with Mini HDMI (Type C) to monitors or TVs with HDMI Type A
• Transmitting 4K video (3840 x 2160) at up to 60 Hz
• Setups requiring compact cables and short connectors for limited space

Key specifications

• Cable length: 0.5 m
• Connector 1: HDMI Type A (Standard), male
• Connector 2: HDMI Type C (Mini), male
• Maximum bandwidth: 18 Gbit/s
• Maximum resolution: 3840 x 2160 pixels (4K) at 60 Hz
• Colour: White
• Gold-plated contacts; triple-shielded cable

How to use

Connect the Mini HDMI (Type C) plug to the camera, tablet or other source device and the HDMI Type A plug to the monitor, TV or projector. Ensure both devices are powered on and set the display input to the correct HDMI port. If the connected devices support Ethernet over HDMI, enable the feature in device settings if required. Avoid bending the cable sharply near the connectors and allow a small radius for routing.

Recommendations

For best performance, use this cable with devices that support HDMI 2.0 or equivalent features and maintain clear line-of-sight routing to minimise electromagnetic interference; avoid running the cable parallel to power cables where possible.