Kabel SATA Tecline 314012, 0,5 m, črn, rdeč

The Tecline 314012 SATA cable is a 0.5 m internal cable for connecting HDDs, SSDs or SATA optical drives to a motherboard or controller with a SATA interface. It supports SATA I/II/III protocols (up to 6 Gbps) and has male SATA connectors on both ends. The cable comes in a black and red colour scheme and is intended for reliable data transfer inside a PC case.

Advantages

The cable supports SATA 1/2/3 standards up to 6 Gbps for backward and forward compatibility. Its 0.5 m length is suitable for tidy internal routing in most desktop systems. The dual-colour (black and red) sleeving helps with visual identification of internal cabling while maintaining a compact form factor with standard male SATA connectors.

Suitable for

Key specifications

How to use

Power down the PC and disconnect the power supply before installing the cable. Plug one male SATA connector into the SATA port on the motherboard or controller card and the other into the SATA data port on the HDD, SSD or optical drive. Reconnect power and boot the system to verify that the drive is detected by the BIOS/operating system. Route the cable to avoid sharp bends or contact with moving parts such as cooling fans.

Recommendations

For reliable performance, use the Tecline 314012 cable for internal connections only and avoid excessive bending or pulling. Pair with an appropriate SATA power connector from the system power supply and ensure connectors are fully seated.