Kabel USB DeLOCK 85487, USB 2.0, 1 m, USB B, črn

This PoweredUSB cable by Delock connects a device with a USB Type-B port and a Hosiden Mini-DIN 3‑pin power port to a PC or hub with a PoweredUSB 24 V port. The DeLOCK 85487 is a 1 m USB 2.0 cable in black designed for combined data transfer and power supply of POS peripherals such as receipt printers, payment terminals and scanners from manufacturers like Epson or Toshiba.

Advantages

The cable supports USB 2.0 data transfer up to 0.48 Gbit/s while also carrying 24 V power over the PoweredUSB interface, eliminating the need for a separate power adaptor. Its USB B connector and Hosiden Mini‑DIN 3‑pin power plug provide compatibility with a wide range of point-of-sale devices. The 1 m length balances reach and cable management for typical POS installations.

Suitable for

• Connecting POS printers to a PoweredUSB port
• Powering and transferring data to payment terminals
• Connecting scanners and other POS peripherals requiring USB B and Hosiden Mini‑DIN power

Key specifications

• Manufacturer: DELOCK
• Model / MPN: 85487
• EAN: 4043619854875
• Connector: USB Type B (device side) and Hosiden Mini‑DIN 3‑pin power
• Interface: PoweredUSB 24 V compatible, USB 2.0
• Maximum data rate: 0.48 Gbit/s
• Cable length: 1 m
• Colour: Black

How to use

Connect the USB Type‑B plug to the peripheral device (for example a receipt printer) and the Hosiden Mini‑DIN 3‑pin power plug to the device's power inlet if present. Plug the PoweredUSB connector into the PC or hub PoweredUSB 24 V port. Once connected, the cable provides both the USB data link and the 24 V power supply; install any required device drivers on the host PC and verify the peripheral is recognised.

Recommendations

Use the cable only with hubs, PCs or power supplies that provide a standard PoweredUSB 24 V output. Inspect connectors before use and avoid excessive bending near terminations to maintain signal integrity and reliable power delivery.