Komplet ročnih izvijačev Bahco BE-9881SL

The Manual screwdriver set Bahco BE-9881SL is a five-piece insulated slim-blade set for slotted and Phillips head screws. It contains three slotted screwdrivers (0.5 x 3 x 75 mm, 0.8 x 4 x 100 mm, 1 x 5.5 x 125 mm) and two Phillips screwdrivers (PH1 x 80 mm, PH2 x 100 mm). Blades are manufactured 30% slimmer than standard insulated blades to improve access in confined spaces. Each blade has a phosphate-finished tip for accurate seating and reduced chipping. Handles are three-component, ergonomically designed according to the ERGO™ process, with a soft ridged surface for improved grip; colour coding and permanent dome symbols make tip selection quick. The set is supplied in a cardboard box and is suitable for work on live equipment up to 1000 V; each tool is individually inspected and manufactured to IEC 60900 and tested in a 10,000 V water bath.

Advantages

Slim insulated blades provide better access to tight screw locations while maintaining safety for live work up to 1000 V. The phosphate tip finish increases contact accuracy and resists flaking. The three-component ERGO™ handles combine comfort and efficient force transmission, and anti-roll flats with hanging holes improve storage and handling. Colour-coded handles and permanent symbols on the domed ends simplify identification of tip size and type.

Suitable for

• Electrical installation and maintenance on live equipment up to 1000 V
• Precision assembly and repair in confined or recessed screw locations
• General mechanical and household screwdriving tasks requiring insulated tools

Key specifications

• Brand: BAHCO
• Model / MPN: BE-9881SL
• Contents: 5 screwdrivers — Slotted: 0.5 x 3 x 75 mm, 0.8 x 4 x 100 mm, 1 x 5.5 x 125 mm; Phillips: PH1 x 80 mm, PH2 x 100 mm
• Blade type: Insulated, phosphate-finished tips, 30% slimmer than regular insulated blades
• Handle: Three-component ergonomic ERGO™ design, colour-coded, anti-roll flat, hanging hole
• Safety: Rated for work on live equipment up to 1000 V; manufactured to IEC 60900; 10,000 V water-bath tested; individually inspected
• Packaging: Cardboard box
• EAN: 7314150304899

How to use

Select the correctly sized slotted or Phillips screwdriver for the screw head using the colour-coded handle and dome symbol. Ensure the tool is in good condition and the insulation is intact before use. Insert tip into the screw head, apply steady axial pressure and turn the handle using controlled torque. For electrical work, confirm the circuit is appropriately treated for live testing procedures if required, and follow applicable safety protocols for working on live equipment up to 1000 V.

Recommendations

Use these insulated screwdrivers only if the insulation is undamaged and the markings are legible. Clean tips and handles after use, store in the supplied cardboard box or appropriate tool holder, and have the tools periodically re-inspected if used for live electrical work in accordance with local regulations and IEC 60900 guidelines.