Lončasta krtača KWB 608030 2,5 cm

The KWB 608030 cup brush has a 2.5 cm diameter and a 6 mm shank. Constructed with crimped HSS steel wire, this tight corner end brush is designed for derusting, cleaning and removal of surface coatings such as paint and excess rubber. It is suitable for working on metal and stone and for accessing difficult shapes and interior surfaces including cast iron gates, grilles and gratings.

Advantages

Crimped HSS steel wire provides effective material removal while maintaining wire stability; the compact 2.5 cm cup size and tight profile allow access to confined or complex areas; 6 mm shank fits common rotary tools and hand-held machines; robust construction supports repeated use on abrasive tasks such as descaling, smoothing and matt finishing.

Suitable for

Key specifications

How to use

Mount the cup brush securely in a compatible rotary tool or drill with a 6 mm chuck. Start at low speed to align the brush and then increase speed as appropriate for the material and task. Apply light, even pressure and move the brush across the surface to remove rust, paint or deposits; avoid excessive force to prevent wire breakage and damage to the workpiece. For interior shapes and narrow areas, work incrementally and reposition the tool to reach confined spots.

Recommendations

Use personal protective equipment including eye protection, gloves and a dust mask. Check the brush before each use for loose wires or damage and replace if necessary. Match brush speed to the tool and the material; consult the rotary tool manual for maximum safe RPM for 2.5 cm cup brushes and observe safe operating practices.