Solarni kabel Lapp XLS-R T 2X6 BK/RD

• Optimized cable design - slim, lightweight and robust
• Time-saving installation ideal for PV off-grid systems

Solar cable XLS-R T are halogen-free, double-insulated and cross-linked twin cables for permanent outdoor use. These cables are used in photovoltaic system construction both for wiring the individual solar modules to each other and for wiring to the inverter.

• Conductor class 5. Core insulation: Temperature-resistant and halogen-free co-polyolefin, radiation cross-linked Pair colours: black/red. Outer sheath: Flame-retardant and halogen-free co-polymer, radiation cross-linked Outer sheath colour: black

Special features of the cross-linked compound include, in addition to the extended temperature range, very good values regarding UV, ozone, and weather resistance as well as abrasion resistance. They are used both for wiring solar modules to each other, as well as for connecting the individual module rows and the inverter.

This item is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this item, you will receive a continuous piece with 10m length.

• Electrical properties

Test voltage AC 6.5 kV dielectric strength tests according to EN 50395

• Thermal properties
• Short-circuit temperature +200°C
• Thermal endurance according to EN 60216-2
• Heat pressure resistance according to EN 60811-3-1
• Damp heat test according to EN 60068-2-78 at 85% humidity
• Mechanical properties

Test of insulation and sheath tear strength as well as elongation: according to EN 60811

• Chemical properties
• Weather / UV resistance according to HD 605/A1
• Flame retardant according to IEC 60332-1-2
• Halogen-free according to IEC 60754-1

Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and sodium hydroxide)

• Installation in the ground

Solar cables can generally be laid in protective conduits suitable for underground installation if it is ensured that there is no permanent contact with water and waterlogging is safely drained.