LED-trakovi SwitchBot W1702110 3 m RGB s spreminjanjem barv

SwitchBot LED Strip Light 3 is a 5 m smart LED strip that supports Matter and connects via Wi‑Fi 2.4 GHz. It offers RGB plus adjustable cold and warm white (CW+WW) LEDs with continuous color temperature control from 2700 to 6500 K and more than 16 million colors. The strip delivers up to 1,200 lumens with 18 W power consumption, features 72 LEDs per metre, IP44 protection and a rated lifetime of 25,000 hours. It is compatible with Apple Home, Alexa, Google Home, Samsung SmartThings, IFTTT and Home Assistant and can be controlled via the SwitchBot app, IR remote, wired controller or voice commands.

Advantages

The LED Strip Light 3 provides wide color and temperature range allowing precise ambient tuning for work, relaxation or entertainment. Matter support ensures broad smart‑home interoperability across major platforms. Built‑in music sync, voice control and optional motion activation add flexible control modes. The flexible 5 m tape with 3M adhesive is easy to cut and mount without tools, while IP44 protection and a 25,000‑hour lifespan provide durable, everyday use.

Key specifications

• Manufacturer: SwitchBot
• Model: LED Strip Light 3 (5 m)
• Power supply: 100–240 V, 50–60 Hz
• Power consumption: 18 W
• Luminous flux: 1,200 lm
• LED type: RGB + CW + WW
• Color temperature: 2700–6500 K (continuously adjustable)
• Brightness adjustment: 1–100%
• LED density: 72 LED/m (24 × RGB, 24 × 2700–3000 K, 24 × 6500 K)
• Strip length: 5 m
• Tape thickness: 1.2 mm
• Lifetime: 25,000 h
• Protection rating: IP44
• Communication: Wi‑Fi 2.4 GHz, Matter
• Compatibility: Apple Home, Alexa, Google Home, SmartThings, IFTTT, Home Assistant
• Control methods: SwitchBot app, IR remote, wired controller, voice commands
• Colors: more than 16 million

How to use

Prepare a clean, dry surface and cut the strip at marked cut points if a shorter length is required. Peel off the protective backing and press the strip firmly in place using the built‑in 3M adhesive. Connect the power supply to a 100–240 V outlet and pair the device via the SwitchBot app over Wi‑Fi or use Matter to add it to a supported smart‑home platform. Use the app, IR remote, wired controller or voice commands to turn on, dim or change colors. Enable music sync in the app to synchronize lighting with audio and optionally connect a motion sensor to activate the strip when movement is detected.

Recommendations

For best adhesion, clean the mounting surface with alcohol and allow it to dry before installation. Avoid placing the strip in direct contact with water despite its IP44 rating. When using Matter or smart‑home integrations, ensure the strip is on a stable 2.4 GHz Wi‑Fi network for reliable operation.