Lindy 31801 kabel USB 2.0 1 m USB B siv

The Lindy 31801 USB cable is a 1 m grey USB 2.0 cable with USB B connectors on both ends. Designed for connecting devices that use USB B ports, it supports the USB 2.0 standard with a maximum data transfer rate of 0.48 Gbit/s. The cable has nickel-plated USB B connectors for improved contact durability and corrosion resistance, and its compact length makes it suitable for desktop and office setups where a short, reliable connection is needed.

Advantages

The cable provides a stable USB 2.0 connection at up to 0.48 Gbit/s, suitable for many peripherals. Nickel-plated connectors increase longevity and maintain reliable electrical contact over repeated insertions. The 1 m length balances reach and cable management, and the neutral grey colour integrates unobtrusively into most workspaces and equipment racks.

Suitable for

• Connecting printers and multifunction devices with USB B ports
• Linking audio interfaces, external drives or hubs that use USB B
• Desk and short-run connections between computers and peripherals
• Replacement or spare cable for USB B equipped equipment

Key specifications

• Connector type: USB B to USB B
• USB standard: USB 2.0
• Maximum data transfer rate: 0.48 Gbit/s
• Cable length: 1 m
• Connector plating: nickel
• Colour: grey

How to use

Plug the USB B connector into the USB B port of the peripheral device and plug the opposite USB B connector into the corresponding USB B port on the host or intermediary device. Ensure connectors are aligned correctly and insert gently until a secure fit is felt. For initial setup, power on connected devices and allow the host system to detect the peripheral; install any required drivers according to the device manufacturer’s instructions.

Recommendations

Use this 1 m USB B cable for short, direct connections where minimal cable slack is preferred. Avoid sharp bends and excessive tension on the cable or connectors. For devices requiring higher transfer rates (for example, large file transfers or high-bandwidth audio), consider using cables and interfaces that support newer USB standards.