Material za 3D tisk Gembird 3DP-PETG1.75-01-BK

Gembird 3DP-PETG1.75-01-BK is a black PETG filament for FDM 3D printing made of Polyethylene Terephthalate Glycol (PETG). It combines high strength, good flexibility and low shrinkage to deliver accurate prints with reduced warping. The material is impact- and chemical-resistant, suitable for parts that require durability and moisture resistance, and is considered recyclable.

Advantages

The PETG filament provides very high strength and improved toughness compared with brittle acrylic alternatives, while remaining a cost-effective option versus polycarbonate. It offers superior chemical resistance among transparent plastics and demonstrates very low shrinkage for reliable printing of large flat surfaces. The filament prints well on common build platforms such as acrylic, glass and Kapton.

Suitable for

• Functional prototypes and mechanical parts
• Enclosures and housings that require impact resistance
• Moisture-exposed components and outdoor parts
• Large flat models where low warp is important

Key specifications

• Material: Polyethylene Terephthalate Glycol (PETG)
• Colour: Black
• Manufacturer: GEMBIRD
• MPN: 3DP-PETG1.75-01-BK
• EAN: 8716309090612

How to use

Load the 1.75 mm PETG filament into a compatible FDM/FFF 3D printer and set print parameters according to your printer and nozzle. Use typical PETG nozzle temperatures (refer to printer or filament-specific guidance) and a heated bed to reduce adhesion issues. Ensure good bed adhesion on acrylic, glass or Kapton surfaces and adjust print speed and cooling to achieve desired surface finish and strength.

Recommendations

For best results, print PETG with a heated bed, moderate cooling, and proper first-layer adhesion; avoid excessive part cooling which can reduce layer bonding. Store the filament in a dry place or sealed with desiccant to preserve print quality.