Microconnect FIB442010 InfiniBand optični kabel 10 m LC moder

The Microconnect FIB442010 is a 10 m OM3 multimode bend-insensitive fibre optic cable with LC connectors on both ends and a 50/125 µm core/cladding. It supports full-duplex transmission and is designed for high-speed Ethernet links such as 10G SR, 10G LRM and for use with SFP+ transceivers, supporting 10G/40G/100G connections. The cable uses LSZH jacket material and meets common industry standards for structured cabling.

Advantages

This OM3 50/125 µm multimode cable exhibits lower attenuation when bent or twisted compared with traditional multimode fibres, simplifying installation and maintenance in confined or complex cable routes. The LC–LC connectors and 10 m length provide a plug-and-play solution for patching between network equipment, while the LSZH jacket reduces smoke and toxic emissions in case of fire.

Suitable for

• 10G Ethernet links using 10G SR or 10G LRM transceivers
• SFP+ and other multimode transceiver connections
• High-density patch panels and short- to medium-reach data centre runs

Key specifications

• Cable type: OM3 multimode bend-insensitive fibre
• Core / cladding: 50/125 µm
• Length: 10 m
• Connectors: LC to LC, duplex
• Jacket: LSZH
• Colour: Blue
• Weight: 0.06 kg
• Brand / MPN: MicroConnect / FIB442010

How to use

Route the Microconnect FIB442010 cable between LC-compatible ports on switches, transceivers or patch panels. Ensure connector end faces are clean before mating; use appropriate dust caps when not connected. For best performance, avoid tight bends below the manufacturer’s recommended bend radius and secure the cable to prevent physical strain on the connectors.

Recommendations

Use this OM3 LC–LC patch cable for short- to medium-distance multimode links in data centres and network closets. Keep connectors clean, avoid exceeding bend radius limits, and choose LSZH cabling where low-smoke, halogen-free behaviour is required.