Microconnect UTP607B mrežni kabel moder 7 m Cat6 U/UTP (UTP)

The MicroConnect Networking Cable UTP607B is a 7 m Cat6 U/UTP patch cable with RJ-45 connectors on both ends and a blue jacket. Designed for standard Cat6 installations, it supports data transfer rates up to 10000 Mbit/s and is suitable for connecting switches, routers, modems or patch panels in home and small office networks. The cable construction meets Cat6 requirements and is tested to 250 MHz, providing backward compatibility with Cat5e and Cat5 systems.

Advantages

This Cat6 cable offers a balance of performance and practical design. The U/UTP shielding reduces external interference in typical indoor network environments, while the integrated boots (snaggles) protect the RJ-45 connectors during tight installations. At 7 meters in length, the cable is long enough for many desktop-to-wall or equipment-to-patch-panel runs without excess slack, and the blue color makes cable identification straightforward in mixed-cable installations.

Suitable for

• Connecting switches, routers and modems to network endpoints
• Patch panel to switch or wall outlet connections in small office or home networks
• Wiring local networks for data, VoIP and multimedia streaming

Key specifications

• Cable category: Cat6
• Length: 7 m
• Connector type: RJ-45 to RJ-45
• Shielding: U/UTP
• Test frequency: up to 250 MHz
• Maximum data rate: up to 10000 Mbit/s
• Colour: Blue
• Weight: 0.162 kg

How to use

Plug the RJ-45 connectors into the network ports of your devices, such as a switch, router or modem, and into the corresponding port on the target device or patch panel. Ensure connectors click into place and avoid sharp bends near the connectors to maintain signal integrity. For installations through cable channels or tight spaces, use the built-in boots to protect the connector latch from snagging or damage during routing.

Recommendations

For best performance, avoid running the cable parallel to high-voltage power lines and keep bend radius gentle; follow structured cabling practices for patch panel and rack installations. The cable is backward compatible with Cat5e and Cat5 equipment and is suitable for typical home and small office network topologies.