Modul SFP Digitus DN-81201 10 Gbit/s 10,0 km

The DIGITUS mini GBIC (SFP) module DN-81201 is a compact fiber optic transceiver designed for high-speed data transmission. It supports data rates up to 10 Gbps and a maximum reach of 10.0 km, is MSA-compliant and includes DDM monitoring. The module is intended for use in fiber networks where reliable, point-to-point optical links are required and comes in a silver housing suitable for standard SFP slots.

Advantages

Plug & Play fiber connection enables quick installation without complex configuration. The transceiver provides high-quality data transmission with enhanced reliability and supports digital diagnostic monitoring (DDM) for status checks. Compliance with MSA standards ensures interoperability with equipment from different manufacturers, and the compact mini-GBIC/SFP form factor fits standard fiber networking ports.

Suitable for

• Establishing switch-to-switch fiber connections
• Connecting media converters to switches or other converters
• Short- to medium-distance uplinks in data centers and server rooms (up to 10 km)
• High-speed 10Gbps network segments requiring SFP transceivers

Key specifications

• Model: DIGITUS DN-81201
• Interface type: mini-GBIC/SFP
• Maximum data transfer rate: 10,000 Mbit/s (10 Gbps)
• Maximum distance: 10.0 km
• Operating temperature: 0 °C to 70 °C
• Diagnostics: DDM (Digital Diagnostic Monitoring)
• MSA-compliant for third-party compatibility
• Colour: Silver

How to use

Insert the DN-81201 SFP module into a compatible SFP slot on your switch, router or media converter until it clicks into place. Connect the appropriate single-mode fiber cable between transceivers at both ends, ensuring correct transmitter/receiver alignment and compatible connectors. Verify link status and monitor parameters via DDM where supported by the host device. No additional software installation is required for basic operation.

Recommendations

Use single-mode fiber for links up to 10 km and ensure both ends use compatible 10Gbps SFP transceivers. Install and operate the module within the specified temperature range (0 °C–70 °C). For reliable operation, use connectors and cabling in good condition and verify DDM readings periodically to detect signal degradation.