Profesionalni priključni kabel Offgridtec 5 m 4 mm², solarni modul na solarni krmilnik polnjenja

2-core solar cable made of copper for connecting solar modules and charge controller.

• With MC4 connectors
• Cable cross-section: 4mm²

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side, the cable has original Multi-Contact MC4 connectors and on the charge controller side, the cable ends are stripped for easy removal of the sheath and exposure of the bare conductor.

The cable can be connected to any charge controller with a suitable connection (min. 4mm²). Most 12V modules have MC-4 connectors.

Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24V systems and above. For 12V you should use at least 6mm². All components were crimped with professional tools and have optimal connection quality.

• Solar cable properties
• 4mm² conductor cross-section
• double insulated
• very flexible
• VDE 0295 class 5 and IEC 60228
• resistant to: UV, ozone, weather, water

very resistant to chemicals and oil - fire resistant according to VDE 0482-332-2

• MC-4 connector & socket properties
• Touch protection, unmated IP2X
• Protection class, mated IP67
• Temperature range -40° ...90° C
• Insulation material PA
• Snap-in locking system
• Cable strain relief according to IEC 61984
• Contact system MC contact lamellas
• Contact material copper, tinned
• Flame class UL94-V0
• Protection class II
• System voltage up to 1000V