Omrežna kartica DeLOCK 95274 interna Ethernet 10000 Mbit/s

The DeLOCK 95274 is an internal M.2 PCIe network card that provides a single 10 Gigabit Ethernet interface. The module installs into an M.2 slot and the network port can be accessed via the slot bracket, enabling high-speed wired connectivity for workstations and servers. The card supports IEEE networking standards and is suitable for environments requiring greater throughput than standard 1 Gbps connections.

Advantages

The card delivers up to 10 Gbps throughput and additionally supports NBASE-T for intermediate speeds of 2.5 Gbps and 5 Gbps when existing cabling or infrastructure does not support full 10 Gbps. Its M.2 host interface allows direct integration into compatible motherboards without occupying a standard PCIe full‑height slot. Compliance with common IEEE standards ensures broad compatibility with Ethernet networks.

Suitable for

Key specifications

How to use

Install the module into a compatible M.2 slot on the motherboard following the board manufacturer’s instructions for M.2 PCIe devices. Secure the slot bracket so the Ethernet port is accessible from the chassis. Connect the network cable to the port and configure the operating system network settings or drivers as required to enable the 10 Gbps or NBASE-T link speeds.

Recommendations

Use CAT6A or higher cabling and compatible network equipment to achieve and maintain 10 Gbps performance; when using existing CAT5e/CAT6 cabling, the card can fall back to 2.5 Gbps or 5 Gbps via NBASE-T depending on cable quality and link conditions.