Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m

Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
7,86 €
PDF
PDF
Zaloga 98 Šifra izdelka 1429520 Model 88201 Garancija 2 leti

Dostava in vračila

Predvidena dostava četrtek, 3. december
O stanju vas bomo sproti obveščali prek našega podrobnega sistema za sledenje
Možnosti plačila
Bančna karticaVisaMastercardPayPalApple PayGoogle PayBančno nakazilo

Postavite vprašanje – AI-pomočnik odgovori takoj.

Opis

InLine fiber optical simplex cable LC/APC to LC/APC OS2 9/125µm, length 1 m, is a single-mode patch cable designed for indoor FTTH and single-channel links. It features LC connectors with 8° APC polish on both ends and OS2 grade fiber with a 9/125 µm core/cladding. The cable is intended for reliable, low-loss connections between the household fiber entry point, optical modem or transceiver and other fiber equipment.

Advantages

The cable provides low insertion loss and high return loss consistent with single-mode OS2 performance, enabling stable transmission for broadband and telecom applications. Its 3.0 mm outer diameter, halogen-free sheath and stainless steel spiral reinforcement increase mechanical stability compared with very thin provider-supplied pigtails. The neutral white sheath allows unobtrusive installation in living areas. A test report is supplied to document optical performance.

Suitable for

  • FTTH indoor patching between fiber entry point and optical modem
  • Connecting single-mode transceivers and ONT/OLT devices
  • Short single-channel links and fiber terminations inside premises

Key specifications

  • Connector type: LC to LC, APC 8° polished
  • Fiber type: Single-mode OS2, 9/125 µm
  • Cable outer diameter: approx. 3.0 mm
  • Construction: armoured/flexible metal tubing with stainless steel spiral reinforcement
  • Sheath: halogen-free, neutral white
  • Typical insertion loss: <0.20 dB
  • Maximum insertion loss (specified): <0.30 dB
  • Return loss: >60 dB
  • Operating temperature range: -40 °C to +85 °C
  • Length: 1 m

How to use

Connect one LC/APC connector to the fiber outlet or patch panel and the other LC/APC connector to the optical modem, transceiver or receiver. Ensure connectors are clean before mating to avoid contamination-related loss; use appropriate dust caps when the cable is not connected. Route the cable with gentle bends, observing the minimum bend radius of the fiber, and secure it in place using clips or cable management suitable for indoor installations.

Recommendations

For consistent optical performance, clean connectors with a fiber cleaning tool before each connection and avoid sharp bends or crushing. Use the supplied test report to verify insertion and return loss if required during installation or maintenance.

How to use

Connect one LC/APC connector to the fiber outlet or patch panel and the other LC/APC connector to the optical modem, transceiver or receiver. Ensure connectors are clean before mating to avoid contamination-related loss; use appropriate dust caps when the cable is not connected. Route the cable with gentle bends, observing the minimum bend radius of the fiber, and secure it in place using clips or cable management suitable for indoor installations.

Recommendations

For consistent optical performance, clean connectors with a fiber cleaning tool before each connection and avoid sharp bends or crushing. Use the supplied test report to verify insertion and return loss if required during installation or maintenance.

Ključne značilnosti
  • Halogen free outer Jacket
  • Armoured Cable OD: 3.0mm±0.2mm
  • flexible metal tubing one core
  • Fiber: OS2 9/125µm - single Mode
  • I-VH-2E,G.652.D
  • APC 8° Polished
  • IL<0.30dB,RL>60dB
  • IL(typical)<0.20dB
  • with test report
  • Conform IEC 610304-2 IEC60332-3-1 IEC60754-2 IEC 61754-20
  • Operating Temperature: -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • OS2
  • 1 m
  • LC Male
  • LC Male
  • Connector polish type: APC
  • Single-mode
  • White

Specifikacije

Specifikacije
Barva izdelka
Bela
Delovna temperatura (T-T)
-40 - 85 °C
Dolžina kabla
1 m
Globina embalaže
160 mm
Mere (ŠxVxG)
150 x 1000 x 10 mm
Polni dupleks
Ne
Povratna izguba
60 dB
Premer jedra
9 µm
Premer kabla
3 mm
Premer plašča
125 µm
Preskusni protokol v kompletu
Da
Priključek 1
LC
Priključek 2
LC
Prostornina paketa
300 cm³
Širina paketa
150 mm
Spol priključka 1
Moški
Spol priključka 2
Moški
Struktura načinov vlakna
Enomodni
Temperatura shranjevanja (T-T)
-40 - 85 °C
Teža
16 g
Teža paketa
24 g
Višina paketa
10 mm
Vrsta optičnega vlakna
OS2
Vrsta poliranja priključka
APC
Vstavitvena izguba
0.3 dB

Letak

Odpri Letak
Zgodovina cen v zadnjih 6 mesecih
Optični kabel InLine simplex, FTTH, LC/APC8° na LC/APC8°, 9/125µm OS2, 1m
Trenutna
7,86 €
Najnižja 7 d.
7,86 €
Najvišja 7 d.
10,98 €
Sprememba 24 h
-0,69 €   -8%
Sprememba 7 d.
-3,12 €   -28%
Sprememba 30 d.
-0,69 €   -8%

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Ista serija in alternative

12

Priljubljeni izdelki v tej kategoriji

7
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije