Patch kabel Digitus CAT 5e U/UTP DK-1511-010 1m

The Digitus CAT 5e U/UTP patch cord DK-1511-010 is a 1 m Ethernet cable designed to meet Category 5e (Class D) standards. Manufactured and tested to ISO/IEC 11801 and DIN EN 50173 specifications, this patch cord delivers performance up to 100 MHz and supports features such as PoE. The cable uses copper conductors and comes with molded boots that provide kink protection, strain relief and a latch protector; the transparent blue plug allows easy identification of Category 5e connectors.

Advantages

The cable is tested for channel compliance and near-end crosstalk (NEXT) up to 100 MHz, ensuring reliable performance for typical Ethernet applications. Copper conductors and RJ-45 connectors provide consistent signal transmission, while the molded boot with latch protection reduces the risk of connector damage during installation and use. The product’s PoE readiness supports powering compatible devices over the network cable.

Suitable for

• Connecting PCs, switches and routers in home and office networks
• Patching between patch panels and network equipment
• PoE devices such as IP phones and access points (within PoE standards)

Key specifications

• Model: DK-1511-010
• Category: CAT 5e (Class D), performance up to 100 MHz
• Length: 1 m
• Cabling: U/UTP
• Conductor material: Copper (Cu)
• Connectors: RJ-45 — both ends
• Product colour: Grey (connector plug transparent blue for identification)
• Standards: ISO/IEC 11801, DIN EN 50173
• PoE: supported (PoE ready)
• EAN: 4016032212102

How to use

Connect one RJ-45 end to your network device (PC, switch, router or patch panel) and the other end to the corresponding port. Ensure connectors are fully inserted until the latch clicks to establish a secure connection. Route the cable without sharp bends to preserve the kink protection and strain relief, and avoid placing heavy objects on the cable to maintain signal integrity.

Recommendations

For optimal performance, use this CAT 5e patch cord within structured cabling installations that adhere to ISO/EN channel specifications and keep cable runs within recommended length limits for Ethernet. When deploying PoE devices, verify that the connected equipment complies with the appropriate PoE standard and power budget.