Patch kabel Digitus CAT 6 U/UTP LSZH 10m

The DIGITUS Patch cord CAT 6 U/UTP LSZH 10m is a Category 6 network cable designed for reliable data transmission in structured cabling systems. It features a copper conductor, RJ-45 connectors on both ends and a molded boot with kink protection, strain relief and latch protection. The connector is transparent red for easy identification of Category 6 cables, while the cable sheath is LSZH (Low Smoke Zero Halogen) for improved fire behavior and low smoke emissions. The patch cord is tested to ISO/IEC 11801 and DIN EN 50173 Category 6 specifications and is PoE+ ready, with performance guaranteed up to 250 MHz.

Advantages

This DIGITUS CAT 6 patch cord provides certified Category 6 performance up to 250 MHz including NEXT characteristics, using copper conductors for stable signal transmission. The LSZH sheath reduces toxic and corrosive emissions in case of fire. A molded boot with kink and strain protection plus a latch guard increases connector durability and handling safety. The transparent red connector allows quick visual identification of Category 6 cabling in installations.

Suitable for

• Structured Ethernet networks requiring Category 6 performance
• Data centers, server rooms and office network patch panels
• PoE/PoE+ powered devices such as IP phones, access points and cameras
• Environments where low smoke and zero halogen materials are required

Key specifications

• Standard: Category 6 (ISO/IEC 11801, DIN EN 50173)
• Frequency performance: up to 250 MHz
• Conductor material: Copper (Cu)
• Length: 10 m
• Connectors: RJ-45 to RJ-45
• Sheath: LSZH (Low Smoke Zero Halogen)
• Color: Blue cable with transparent red connector
• MPN: DK-1617-100/B
• EAN: 4016032388043
• PoE: PoE+ ready

How to use

Connect one RJ-45 connector to your network device and the other to a switch, patch panel or router. Ensure connectors are fully inserted until the latch clicks and that the molded boot is seated to provide strain relief. Route the cable without sharp bends or excessive tension to preserve performance and avoid damaging the LSZH sheath or internal conductor. Verify link status on connected devices and test cable performance if required using appropriate network testers.

Recommendations

Use this DIGITUS CAT 6 LSZH patch cord for horizontal and patching connections in LAN installations where certified Category 6 performance and low-smoke, zero-halogen materials are desired. Avoid running near high-power electrical equipment that may cause interference, and replace the cable if the connector or sheath shows visible damage.