Patch kabel Equip Cat.6 S/FTP RJ-45 7,5 m rdeč

The Equip Cat.6 S/FTP Patch Cable (7.5 m) with RJ-45 connectors is manufactured from quality materials and tested to meet industry standards. Its Cat.6 construction and S/FTP shielding deliver higher bandwidth and an improved signal-to-noise margin for stable gigabit connections. The red jacket provides easy visual identification in network installations.

Advantages

The patch cable supports 10/100/1000Base-T(X) and a data transfer rate up to 1000 Mbit/s, while RJ-45 connectors with gold plating ensure reliable contacts and reduced corrosion. Overall S/FTP shielding minimises electromagnetic and crosstalk interference, enabling consistent performance in demanding environments.

Suitable for

• Office and data centre gigabit Ethernet connections
• Structured cabling and patch panels
• High-density network racks and switch-to-switch links
• Environments requiring reduced electromagnetic interference

Key specifications

• Length: 7.5 m
• Connectors: RJ-45 to RJ-45, gold plated
• Cabling technology: 10/100/1000Base-T(X)
• Shielding: S/FTP (overall shield + foil screened pairs)
• Data rate: up to 1000 Mbit/s
• Colour: Red
• Weight: 0.292 kg

How to use

Connect one RJ-45 plug to your network device and the other to a switch, router or patch panel. Ensure connectors are fully seated to achieve optimal contact. Route the cable to avoid sharp bends and mechanical strain; secure with cable ties or organisers if required. Use matching port speeds and settings on network devices for best throughput.

Recommendations

For long-term reliability, avoid running the cable parallel to power lines and keep bend radius above the manufacturer’s recommended minimum. Inspect connectors periodically for dirt or damage and replace the cable if shielding or jacket is compromised.