Patch kabel Equip Cat.6A RJ-45 U/UTP 1,5 m moder

The Equip Cat.6A U/UTP Patch Cable is a 1.5 m network cable with RJ-45 connectors on both ends, designed for 10GBase-T networks. The cable supports up to 10000 Mbit/s data transfer and uses unshielded U/UTP construction to reduce electromagnetic interference and maintain signal integrity in demanding environments.

Advantages

This Cat.6A patch cord is made from quality materials and tested to industry standards, providing improved bandwidth and a better signal-to-noise margin compared with lower category cables. The RJ-45 connectors ensure compatibility with standard network equipment, while the 1.5 m length offers flexibility for patching racks, switches, and desktop devices. The blue jacket helps with cable identification.

Suitable for (tasks / use cases)

• 10GBase-T network connections between switches, patch panels and servers
• Office and data centre patching where high-speed links are required
• Workstations, routers and network devices requiring reliable Ethernet links

Key specifications

• Cable length: 1.5 m
• Connectors: RJ-45 — RJ-45
• Category: Cat.6A, U/UTP
• Data transfer rate: 10000 Mbit/s
• Cabling technology: 10GBase-T
• Colour: Blue
• Weight: 0.0453 kg
• Brand: EQUIP; MPN: 603133; EAN: 4015867236994

How to use

Connect one RJ-45 end to the network device (switch, router, server or workstation) and the other RJ-45 end to the corresponding port on the patch panel or network equipment. Ensure connectors are fully inserted and locked to achieve proper link status. Route the cable to avoid tight bends and sources of strong electromagnetic interference.

Recommendations

For optimal performance, use this Cat.6A U/UTP patch cable in structured cabling systems supporting 10GBase‑T and avoid running parallel to high-voltage power lines. Verify link speed on connected devices and replace the cable if connectors or jacket show visible damage.