Patch kabel Equip Cat.6A U/UTP RJ-45 1m rumen

The Equip Cat.6A U/UTP Patch Cable RJ-45 1m in yellow is a 1 metre networking cable designed for high-speed Ethernet connections. It uses Cat6A cabling technology with U/UTP construction and RJ-45 connectors on both ends, supporting data transfer rates up to 10000 Mbit/s (10GBase-T). Compact and lightweight, this patch cable is intended for short links in structured cabling, patch panels and network equipment interconnects where minimal interference and reliable 10 Gb performance are required.

Advantages

This Equip Cat.6A patch cable provides 10GBase-T performance in a 1 m length with U/UTP shielding to reduce electromagnetic interference. The RJ-45 connectors ensure compatibility with standard network ports and patch panels. Its yellow colour simplifies cable identification in racks and cable management systems while the low weight facilitates easy handling and installation.

Suitable for

• Short connections between switches, patch panels and servers
• High-speed 10 Gigabit Ethernet links within data cabinets
• Office and small server room structured cabling
• Cable management where colour coding is required

Key specifications

• Brand: EQUIP
• Manufacturer part number (MPN): 603062
• EAN: 4015867230428
• Cable length: 1 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10GBase-T (Cat.6A)
• Shielding: U/UTP
• Maximum data rate: 10000 Mbit/s
• Product colour: Yellow
• Weight: 0.034 kg

How to use

Connect one RJ-45 end of the patch cable to the Ethernet port of a network device (for example a switch, router or server) and the other RJ-45 end to the corresponding port on another device or patch panel. Ensure both ports support the intended link speed and that connectors are fully inserted until they click. For best results, avoid sharp bends, excessive pulling force and routing near high-power electrical sources to maintain signal integrity.

Recommendations

Use the Equip Cat.6A U/UTP 1 m patch cable for short, high-speed links and colour-coded cabling. Verify that connected equipment supports 10GBase-T to achieve maximum throughput and consider using cable management accessories to prevent strain on the connectors and maintain clear identification.