Patch kabel Equip Cat.6A U/UTP RJ-45 3m rumen

The Equip Cat.6A U/UTP Patch Cable is a 3 m network cable with RJ-45 connectors on both ends, designed for 10GBase-T networks and data rates up to 10000 Mbit/s. The U/UTP construction reduces external electromagnetic interference while the yellow jacket provides easy visual identification in cabling installations.

Advantages

This Cat.6A patch cable uses quality materials and is tested to meet industry standards, delivering higher bandwidth and improved signal-to-noise margin compared with lower-category cables. It supports ultrahigh, low-error performance suitable for demanding network environments and 10G applications.

Suitable for

• 10GBase-T network connections
• Patch panels and switches in data centres
• Workstation-to-wall outlet connections
• Cabling runs where reduced interference is required

Key specifications

• Category: Cat.6A U/UTP
• Length: 3 m
• Connectors: RJ-45 — both ends
• Data rate: up to 10000 Mbit/s
• Cabling technology: 10GBase-T
• Colour: Yellow
• Weight: 0.081 kg
• Brand: EQUIP, MPN: 603064, EAN: 4015867230442

How to use

Plug one RJ-45 connector into the network device (switch, router or NIC) and the other connector into the corresponding port on the destination device or patch panel. Ensure connectors are fully inserted until the latch clicks and avoid tight bends or kinks near the connector ends to maintain optimal signal quality.

Recommendations

For best performance, use the cable within recommended bend radius, keep it away from high-power electrical cables, and route it through proper cable management. Verify connector seating and test the link after installation to confirm 10G connectivity where required.