Patch kabel helos 263795 RJ-45 m/m 10 m S/FTP Cat 6a

Patch cable helos 263795 is a 10 m S/FTP Cat 6a network cable with RJ-45 male-to-male connectors in green. It is intended for Ethernet connections up to 10 Gigabit speeds and features improved shielding to reduce crosstalk and external interference. The cable is halogen-free and uses copper conductors with a TPE jacket for flexibility and durability.

Advantages

The S/FTP construction provides individual foil shielding for each pair plus an overall braid, improving protection against electromagnetic interference. The cable is halogen-free for safer use in confined spaces, includes a kink-protection sleeve on the connectors and gold-plated contacts for reliable signal transfer. A length print on the jacket supports easy identification during installation.

Suitable for

• Structured cabling in offices and data rooms
• Patch panel to switch or switch to workstation connections
• 10 Gigabit Ethernet links in short to medium runs
• Environments requiring reduced electromagnetic interference

Key specifications

• Type: Patch cable, Cat 6a
• Length: 10 m
• Connectors: RJ-45 male to RJ-45 male
• Cable construction: S/FTP (shielded foiled twisted pairs with overall braid)
• Conductor: Copper, AWG 27
• Jacket material: Thermoplastic elastomer (TPE), halogen-free
• Pairs: 4 (8 conductors)
• Contact plating: Gold
• Color: Green
• Standards: IEC 60754-2 marking

How to use

Connect one RJ-45 male plug of the helos 263795 patch cable to the network port of a switch, patch panel or workstation and plug the other end into the corresponding RJ-45 socket. Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid tight bundling with power cables to maintain shielding effectiveness and signal quality.

Recommendations

For best results in 10 Gigabit Ethernet applications, keep individual run lengths within recommended structured cabling guidelines, avoid excessive bending radius, and keep the cable separated from strong electrical noise sources. Inspect connectors for damage before installation and replace the cable if the jacket or contacts are compromised.