Patch kabel InLine S/FTP PiMF Cat.8.1, brez halogenov, 2000MHz, moder, 2m

The InLine Patch Cable S/FTP PiMF Cat.8.1 halogen free 2000MHz blue 2m is a high-frequency Ethernet patch cable intended for demanding network environments. It supports transmission up to 2000 MHz and uses S/FTP (shielded with foil around pairs and overall braid) PiMF construction to reduce electromagnetic interference. The cable is halogen-free and terminated with RJ-45 connectors on both ends, offering compatibility with standard networking devices and patch panels.

Advantages

The S/FTP PiMF Cat.8.1 design provides enhanced protection against crosstalk and external interference, which helps maintain signal integrity at high frequencies. A 2 m length makes the cable suitable for short connections between switches, patch panels and servers without excess slack. Halogen-free materials reduce the release of corrosive gases in the event of fire. The blue jacket and standard RJ-45 terminations ensure straightforward identification and installation in structured cabling systems.

Suitable for

• High-speed links in data centers and server rooms
• Short-distance connections between network switches and patch panels
• Installation in environments where reduced interference is required
• Structured cabling projects requiring halogen-free cables

Key specifications

• Cable category: Cat.8.1
• Shielding: S/FTP PiMF (individually foil shielded pairs with overall braid)
• Frequency rating: 2000 MHz
• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Jacket type: halogen-free
• Colour: blue

How to use

Connect each RJ-45 connector to the corresponding port on network devices such as switches, routers or patch panels. Ensure connectors are fully seated and that the cable is routed without sharp bends or excessive tension to preserve shielding and performance. For best results in structured cabling, measure runs to avoid unnecessary length and keep the cable away from strong electrical noise sources where possible.

Recommendations

Use this Cat.8.1 S/FTP PiMF patch cable for short, high-bandwidth links in rack-mounted and data center equipment. Verify port compatibility for Cat.8.1 performance and avoid tight bends or kinks; maintain bend radius recommended by industry standards to preserve transmission characteristics.