PoE injektor Logitech 952-000074 30 W bel

The PoE Injector Logitech 952-000074 30W White supplies up to 30 watts of power over Ethernet to compatible devices while supporting Cat5e cable types. Designed for conference equipment installations, this compact injector accepts a wide input voltage range of 100–240V at 50/60Hz and delivers stable power for networked peripherals. Its small footprint (60.2mm × 36.3mm × 91mm) and white finish allow unobtrusive placement in meeting rooms, equipment racks, or near endpoints that require Power over Ethernet.

Advantages

The Logitech PoE Injector 952-000074 provides a reliable 30W output in a lightweight, compact housing that fits into varied setups. Native support for Cat5e cabling simplifies integration with existing network infrastructure. Wide input voltage compatibility (100–240V, 50/60Hz) enables use in different regions without additional adapters. The white colour and small dimensions reduce visual impact and ease installation near conference cameras, access points, or other PoE-enabled peripherals.

Suitable for

• Powering PoE-compatible conference cameras and audio devices
• Supplying PoE to wireless access points in meeting rooms
• Providing power to IP endpoints where PoE switches are not available
• Small office or room installations with Cat5e cabling

Key specifications

• Model: Logitech 952-000074
• Output power: 30W
• Cable support: Cat5e
• Input voltage: 100–240V
• Input frequency: 50/60Hz
• Colour: White
• Dimensions (W × D × H): 60.2mm × 36.3mm × 91mm

How to use

Connect the injector to an AC power source within the specified 100–240V, 50/60Hz range. Use a Cat5e Ethernet cable to link the data source (network switch or router) to the injector’s data input, and connect the injector’s PoE output to the target PoE device using a second Cat5e cable. Ensure cable connectors are secure and observe device power requirements to confirm compatibility with the 30W output. Position the injector where ventilation is adequate and access to cables is convenient.

Recommendations

Verify that the connected device supports PoE and that its power draw does not exceed 30W. When installing in permanent locations, route Ethernet cables to avoid strain on ports and maintain proper bend radius for Cat5e. For multi-device deployments, consider PoE switches if centralized power distribution and management are required.