Račun Kontakt
Vaša košarica
DPD in FedEx – datum dostave na strani izdelka
Potrebujete pomoč? Vprašajte našo umetno inteligenco

Polnilnik baterij SkyRC SK-100161

Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
Polnilnik baterij SkyRC SK-100161
39,31 €
PDF
PDF
Zaloga 643 Šifra izdelka 876895 Model SK-100161-01 Garancija 2 leti

Dostava in vračila

Predvidena dostava četrtek, 26. november
O stanju vas bomo sproti obveščali prek našega podrobnega sistema za sledenje
Možnosti plačila
Bančna karticaVisaMastercardPayPalApple PayGoogle PayBančno nakazilo

Opis

SkyRC SK-100161 (iMax B6 V2) is a compact, microprocessor-controlled battery charger and DC/DC converter designed for RC hobbyists and general battery maintenance. It supports most mainstream battery chemistries including LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCd and Pb, offers a DC input range of 5–26 V and delivers up to 60 W power with maximum charge current up to 6 A. The unit also provides dedicated support for DJI Mavic/Inspire batteries with up to 4 A charge current and includes safety features such as thermal cutoff when used with an optional temperature sensor.

Advantages

The SkyRC SK-100161 combines charging, discharging and DC/DC conversion in a single compact device, providing up to 60 W output from a wide 5–26 V DC input. Its ARM Cortex-M3 microcontroller improves processing speed and anti-interference capability. The charger displays battery icon and real-time charge/discharge percentage for intuitive monitoring, includes AGM and cold-charge modes for lead-acid batteries, and delivers higher charge power (about 20% more) compared with the previous B6 model.

Suitable for

  • Charging LiPo / Li-Ion / LiHV / LiFe cells
  • Charging NiMH and NiCd batteries for RC transmitters and receivers
  • Maintaining lead‑acid (Pb) and AGM batteries, including cold-charge situations
  • Charging DJI Mavic and Inspire flight batteries (up to 4 A)
  • Powering small DC field accessories (tire warmers, PIT lights) via DC/DC output

Key specifications

  • Input voltage: 5–26 V DC
  • Maximum integrated power: 60 W
  • Maximum charge current: 6 A (general); up to 4 A for DJI Mavic/Inspire
  • Supported chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCd, Pb (AGM supported)
  • Processor: ARM Cortex-M3 32-bit microcontroller
  • Safety features: thermal cutoff (requires optional temperature sensor cable SK-600040-01)
  • Certifications: CE, FCC (as per manufacturer statements)

How to use

Connect the charger to a suitable 5–26 V DC power source and attach the battery following the correct polarity and connector type. Select the appropriate battery chemistry and charging profile on the charger, set the desired charge current (max 6 A, or 4 A for supported DJI batteries), and start the charge cycle. For lead-acid batteries or low-temperature charging, choose the AGM or Cold Charge mode. To enable thermal cutoff protection, attach the optional temperature sensor to the battery and plug it into the charger.

Recommendations

Always verify battery type, cell count and connector polarity before charging. Use a power supply that matches the charger's input range and ensure the optional temperature sensor (SK-600040-01) is used when you require thermal cutoff protection. Follow local regulations and manufacturer safety guidance when charging and storing batteries.

Ključne značilnosti
  • Charging LiPo / Li-Ion / LiHV / LiFe cells
  • Charging NiMH and NiCd batteries for RC transmitters and receivers
  • Maintaining lead‑acid (Pb) and AGM batteries, including cold-charge situations
  • Charging DJI Mavic and Inspire flight batteries (up to 4 A)
  • Powering small DC field accessories (tire warmers, PIT lights) via DC/DC output
  • Input voltage: 5–26 V DC
  • Maximum integrated power: 60 W
  • Maximum charge current: 6 A (general); up to 4 A for DJI Mavic/Inspire
  • Supported chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCd, Pb (AGM supported)
  • Processor: ARM Cortex-M3 32-bit microcontroller
  • Safety features: thermal cutoff (requires optional temperature sensor cable SK-600040-01)
  • Certifications: CE, FCC (as per manufacturer statements)

Specifikacije

Specifikacije
Barva izdelka
Modra, bela
Certifikacija
CE, FCC
Funkcije zaščite napajanja
Pregrevanje
Količina na paket
1 pc(s)
Napetost polnjenja
5-26
Polnilni tok
6 A
Število podprtih baterij
1
Vgrajeni zaslon
Da
Vrsta vira napajanja
DC
Združljive tehnologije baterij
Litijev železov fosfat (LiFePo4), litijev polimer (LiPo), litij-ionska (Li-Ion), nikelj-kadmijeva (NiCd), nikelj-metal-hidridna (NiMH), svinčeno-kislinska (VRLA)
Zgodovina cen v zadnjih 6 mesecih
Polnilnik baterij SkyRC SK-100161
Trenutna
39,31 €
Najnižja 7 d.
38,77 €
Najvišja 7 d.
39,31 €
Sprememba 24 h
0,00 €   0%
Sprememba 7 d.
+0,54 €   +1%
Sprememba 30 d.
0,00 €   0%

Napiši mnenje

Ocena *
Opomba: HTML se ne prevede!

Več izdelkov SKYRC v tej kategoriji

12
Prodajalec: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilna, Litva · Matična številka 303192950 · ID za DDV LT100008198612 · Pošiljamo iz EU (Litva)
WhatsApp
Messenger
Pozdravljeni, sem AI-pomočnik DistriNode. Lahko vam pomagam najti izdelke, primerjati možnosti, ustvariti PDF-ponudbe ali odpreti zahtevke za podporo.
Vse kategorije