Krmilna enota Pylontech SC0500-100S-V2 za H48050 Powercube X1 s kompletom kablov 2 m

The Pylontech SC0500-100S-V2 is a central monitoring and control unit that is part of the Powercube X1 high-voltage battery system.

• Protection and control unit
• For up to 10 battery modules in one tower
• Easy installation

The SC0500-100S-V2 from Pylontech acts as a central unit for monitoring and controlling the latest generation. The BMS is an important component of the Powercube X1 high-voltage battery system and enables seamless communication with compatible inverters. To complete the entire system, in addition to the BMS, 2-10 battery modules can be connected, each high-voltage battery having a capacity of 2.4 kWh. These are connected in series to form a battery tower with a control unit, which can have a maximum capacity of 24 kWh. If several towers are to be connected in parallel, one control unit is required per tower.

Pylontech's long-proven communication protocol is directly supported by a large number of inverters.

The Powercube X1 control unit protects against

• Deep discharge and overcharge
• Overvoltage during charging
• Excessive currents during charging and discharging
• Over- and under-temperature
• Short circuit and reverse polarity
• The Powercube X1 energy storage system

The Powercube X1 series from Pylontech is a high-voltage battery system of the latest generation. The complete system is flexible to use and expandable if required. An energy system can be built with at least 2 and up to 10 battery modules. One BMS control unit is required per Powercube X1 tower for operation. Caution: The Powercube does not have a soft-start circuit!

• Flexible expansion

The Powercube battery system from Pylontech offers high flexibility through its expandable configuration options, ranging from 4.8 kWh to 24 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables.

Monitoring functions of the control unit

• Operation recording
• Current
• Voltage
• Temperature
• State of charge
• 1x Pylontech SC0500-100S-V2 BMS control unit
• 1x Cable set for parallel connection incl. grounding
• 4x M6 nut + screws
• 1x Manual and certificate